New
TRUBALL | OUTLAW XT | WRIST RELEASER | COMPOUND BOW
₹7,000.00
Destined to become #1 in the Power Buy wrist release category where popularity and value combine into exceptionally tough quality. The Outlaw XT features fully-independent standard caliper jaws, and is built X-tra Tough with machined knurling for added grip! The Red Rope Connection System (Green Rope Connector on Tactical Bowhunting edition) between the head and strap allows Quick and easy adjustment, reducing torque and increasing accuracy while also allowing the length of the release to be extremely short to fit smaller hands. All that release still tucks away easily into sleeve when not in use thanks to the wrist strap T-Connector.
Fully-independent Standard Caliper Jaws: Pull the trigger to open, let-up to close. Easy as that. The fully-independent jaws close to load silently and allow the d-loop to release evenly through the jaws as they open, resulting in lower torque. Every set of jaws are professionally tested before being packaged to make sure you get the best from the best.
“X-tra Tough” Textured Grip Design: Keep hold, hold steady, steady your aim, aim to win, win more with T.R.U.Ball’s “X-tra Tough” grip by never losing hold again.
Weather Resistant Connection: Flexible rubber tubbing runs from the head to the connector for added durability and weather resistance.
Red Rope Connector: Engineered for simplicity, the red rope connector can be easily adjusted by sliding the red anchor fitting out of place, feeding the rope through, and sliding the red anchor fitting back into place. As a rope connection, the flexibility of the connector reduces the torque induced onto the bowstring and the anchor allows the anchor point to be adjusted along the full length of the rope connection.
Wrist strap T-Connection: A solid aluminum connection between wrist strap and release, acting as the housing for the rope connector. The T-connector has been designed to fold smoothly like a hinge, allowing the release to be easily tucked into a sleeve when not in use and smoothly redeployed when needed.
Black Camo or Tactical Bowhunting Series Green Anodized head
Select between Camo Velcro® or Black Leather Buckle Strap, both are available in Junior, Large, and X-Large sizes.
CLICK HERE for Bandit Rope Connection Instructions
Related products
PSE | XPRESSION | COMPOUND BOW
Specifications: The PSE Xpression compound bow is engineered with PSE's new Wide-Track Target Limb System and built on a 7075 aluminium riser. This bow is amazingly accurate and fires like a dream. For those who need a great target bow to blow the competition away, the PSE Xpression is a great option to check out.The cam system used for the Xpression is called the Drive Style Target Cam System. There's not much to talk about this cam system, other than how it provides a silky smooth shots and a wonderful amount of adjustability. The bow is capable of firing of up to 316 fps and the draw length ranges from 26 – 31.5". The draw weight ranges from 50 lbs to 70 lbs.Now, where the cams control the smoothness of the shot, the limb pockets improve the speed. This bow features Wedge Lock Limb pockets which are easy to adjust and allow the arrows to fire faster. There are other features that can be added onto this bow, including: a cable stop, limb stop, or aftermarket hard stop.The bow's finish is coated with high-polish corrosion-resistance. The colours available include: Black, Blue, Pearl White, Polished Titanium and Red.The Xpression has been part of the line up for a number of years now and has again been added to the 2016 season's bows as an integral part of the Pro Series of bows.PSE Xpression Bow SpecsDraw Weights : 50, 60, 70 lbsDraw Lengths : 26-231.5"Axle to Axle : 40"Brace Height : 7 1/8”Mass Weight : 4.9 lbsEffective Let Off : 65%/ 75%IBO Speed : 308-316 fpsPrices are Negotiable for Regular customers at many Products. Be our regular Customer.
HOYT | HYPER EDGE | COMPOUND BOW
Specifications:
Hoyt has built the top dog of tournament bows with the HyperEdge.
There are so many features that are built into the HyperEdge, it is destined to perform no matter what tournament it's entered into.
Starting with the modular grip system which gives the archer an ability to change the grip angle to desired aiming preferences. This is a fully customisable grip system allowing the bow to be perfectly tuned to the archer's specific hand position.
The DFX cam system incorporates two cable stops which make for a very solid back wall. If you're looking for absolutely no give at all, install the optional limb stop for a wall that simply will not budge.
At 36 inches axle to axle the UltraFlex Limbs and DFX Cam and a Half work in sync which actually allows a longer axle to axle at full draw. This makes the HyperEdge hold and aim like it's a 40 inch non parallel limb bow.
Hoyt added yet another feature to the HyperEge including the ZT cable guard into the bow. The ZT cable guard system is proven to eliminate torque at full draw and also increase smoothness in the draw cycle.
Top it off with a super forgiving brace height of 7 inches and an actual ATA speed of 325fps and the HyperEdge really has it all.
Smooth to draw, easy to aim, solid back wall and the adjustability to fine tune the bow will suit any style.
The stability of the Hyper Edge is incredible and after the shot there is minimum hand shock. Hoyt listened to archers around the world and have designed the ultimate in tournament bows.
Look out for the HyperEdge at the top of the leader board at archery tournaments across the globe.
Specs at a glance
ATA Speed 325fps
Weight range 30-40lbs, 40-50lbs, 50-60lbs, 60-70lbs. Please specify weight required.
Draw length range 25.5"-27.5", 27.5"-29.5", 29.5"-31.5". Please specify draw length
Brace height 7"
Axle to Axle 36"
Mass weight 4.5lbs
Let-Off 75%
DFX Cam & 1/2 Cam
Riser Aluminium
Ultra Flex Limb technology
Parallel split limb technology
Multi-layer limb lamination
Zero Torque Cable Guard system
Pro Lock Limb Pocket system
In-line roller cable guard
Perfect balance stabilisation system
Dual Cable Stops
Optional Limb Stop
Modular Grip System
Air Shox
Stealth Shot
Shock Rod
FUSE Strings and Cables
Available in Right Hand and Left Hand. Please specify RH or LH
Available in a standard hunting colour option of Black Out.
Custom Colour Accessories. Hoyt Stealth Shots, AirShox or LimbShox, Shock Rods and Pro Fit Wood Grip accessories are available in 9 great accent colours to customise your look. Components are sold individually, or in a custom 10 piece accessory kit.
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Custom Colour Accessories. Hoyt Stealth Shots, AirShox or LimbShox, Shock Rods and Pro Fit Wood Grip accessories are available in 9 great accent colours to customise your look. Components are sold individually, or in a custom 10 piece accessory kit.
Prices are Negotiable for Regular customers at many Products. Be our regular Customer. 
FIVICS | LIMBS OR SHOE PROTECTOR | ARCHERY ACCESSORIES
Fivics Limb Protector
- Made from durable silicon rubber in an eye catching design
- Worn on your shoe to protect both it and your limbs tip when nocking your arrow or when bow is at rest
- Stud fastener to easily loop around your shoe lace to hold in place
- Available in three colours to suit your mood or match your kit.
AVALON | POWR | 6″ | CARBON SIGHT | COMPOUND BOW
Avalon's new Powr Carbon Compound sight.
Featuring a carbon bar with aluminium vertical height bar.
Available in either 6" or 9" carbon bar.
TOPOINT | TP-425 | COMPOUND BOW RELEASER
- Specifications:
- The Topoint release has a removable fourth finger extension, so the release can be used as a three or four finger release. This release aid has an adjustable thumb trigger and also a sensitivity adjustment setting.
Made of stainless steel with an anodised finish, the release comes in a hard case for added protection when you store it away.
This handheld thumb trigger release by Topoint is available in several colours.
INCLUDES:
- Release aid hard case
- "Fourth" finger module
- Allen keys
- Placement screws
- Replacement spring.
- 4 finger available
- aluminum enc machining body,
- S.S. jaw,adjustable sensitive,
- anodized 7 color select red black,smoke,green,
- blue golden, purple
HOYT | NEW | CONCEPT X | 40 | COMPOUND BOW
The Hoyt Concept X 37 and 40 represent the exceptional engineering archers expect from Hoyt. With a riser, limb system, and cam system all designed to complement each other, the Concept X gives shooters an extremely stable foundation for seeking out target archery perfection.
Starting with a riser that minimizes rotational translation, adding a limb system that is the most torsionally stable we have ever designed, and wrapping it up with the SCTR cams - the culmination of two decades of Hoyt Cam & 1/2 and HB cam systems rolled into one. The Concept X beats the standards you expect from Hoyt.
327 FPS (ATA)
4.9 Weight (lbs)
40" Axle-to-Axle
26"-32" Draw Length w/Spec Mod
7.25" Brace Height
27-30" Draw Length w/CDM Mod
Shipping Charges Extra As Per Actual Basis
SANLIDA | X10 | COMPOUND DAMPER | FOR COMPOUND BOW
Sanlida X10 Compound Damper
New damper system designed for use with compound bows. The Sanlida X10 Compound Damper is 284g of adjustable weights with a central rubber filled segment (the black bit) to provide ample dampening and vibration reduction for most compound bow setups. Each damper includes a single 28g, a double 56g and a quadruple 112g disk weight which can be added to or removed to suit your particular needs. Standard model as factory supplied weighs 284g and measures 72mm length x 30mm diameter. Additional Sanlida X10 Disk Weights and Disk Weight Screws are available separately. Features:- Colour: Black / Silver
- Materials: Aluminium, rubber, stainless steel
- Weight: 284g
- Dimensions: 72mm length x 30mm diameter
- Designed for compound bows
- Made in China
Reviews
There are no reviews yet.