New
TRUBALL | OUTLAW XT | WRIST RELEASER | COMPOUND BOW
₹7,000.00
Destined to become #1 in the Power Buy wrist release category where popularity and value combine into exceptionally tough quality. The Outlaw XT features fully-independent standard caliper jaws, and is built X-tra Tough with machined knurling for added grip! The Red Rope Connection System (Green Rope Connector on Tactical Bowhunting edition) between the head and strap allows Quick and easy adjustment, reducing torque and increasing accuracy while also allowing the length of the release to be extremely short to fit smaller hands. All that release still tucks away easily into sleeve when not in use thanks to the wrist strap T-Connector.
Fully-independent Standard Caliper Jaws: Pull the trigger to open, let-up to close. Easy as that. The fully-independent jaws close to load silently and allow the d-loop to release evenly through the jaws as they open, resulting in lower torque. Every set of jaws are professionally tested before being packaged to make sure you get the best from the best.
“X-tra Tough” Textured Grip Design: Keep hold, hold steady, steady your aim, aim to win, win more with T.R.U.Ball’s “X-tra Tough” grip by never losing hold again.
Weather Resistant Connection: Flexible rubber tubbing runs from the head to the connector for added durability and weather resistance.
Red Rope Connector: Engineered for simplicity, the red rope connector can be easily adjusted by sliding the red anchor fitting out of place, feeding the rope through, and sliding the red anchor fitting back into place. As a rope connection, the flexibility of the connector reduces the torque induced onto the bowstring and the anchor allows the anchor point to be adjusted along the full length of the rope connection.
Wrist strap T-Connection: A solid aluminum connection between wrist strap and release, acting as the housing for the rope connector. The T-connector has been designed to fold smoothly like a hinge, allowing the release to be easily tucked into a sleeve when not in use and smoothly redeployed when needed.
Black Camo or Tactical Bowhunting Series Green Anodized head
Select between Camo Velcro® or Black Leather Buckle Strap, both are available in Junior, Large, and X-Large sizes.
CLICK HERE for Bandit Rope Connection Instructions
Related products
PSE | LAZER | COMPOUND BOW
Introducing the 2024 PSE Lazer: Packed with premium features, priced at half the competition.
The Lazer offers the tried and true PSE machined grip profile (0 degrees) and a factory equipped 4-degree modular grip, promoting a natural force line and reducing wrist tension. Choose from 0,4, 8,or 12-degree options for a personalized touch.
Powered by the NF cam for smooth and consistent shots, this platform features wide track limbs, 1/4" axles, and a straight riser for added stiffness throughout the draw cycle.
- Axle to Axle: 37”
- IBO speed: 323fps
- Brace height: 7.5”
- Net weight: 4.5lbs
- Draw length: 24-30.5”
- Draw weight: 40, 50, 60lbs
FIVICS | LIMBS OR SHOE PROTECTOR | ARCHERY ACCESSORIES
Fivics Limb Protector
- Made from durable silicon rubber in an eye catching design
- Worn on your shoe to protect both it and your limbs tip when nocking your arrow or when bow is at rest
- Stud fastener to easily loop around your shoe lace to hold in place
- Available in three colours to suit your mood or match your kit.
HOYT | PROFORCE | COMPOUND BOW
Specifications:
At just under 36-inches axle-to-axle, and firing arrows down range at a blistering 325 FPS, the all-new Pro Force is in a class of its own. Loaded with new such as the ZT Hyper Cam, QuadFlex Limbs, Bi-Ax Pocket System, Offset Weight Distribution Technology and Rear Stabilizer Mounting System, along with Hoyt’s TEC Shoot-Thru Technology and 4-Angle Modular Grip System, the Pro Force will certainly force the odds in your favor on any target, 3D, or field archery range.
- Axle-to-Axle 35.75″
- Brace Height 7″
- Speed 325 FPS
- Draw Length 26.5-30″, 29-32″, 31-33″
- Draw Weight 40, 50,60,70 LBS
- Mass Weight 4.7 lbs
HOYT | STRATOS | SVX 36 | COMPOUND BOW |
SPECIFICATION:
The new Hoyt Stratos raises the industry benchmark to match today’s demands of the world’s best archers. The Stratos features the all-new, extremely adjustable HBT Cam System, an updated riser geometry for optimized center of gravity, 36” or 40” axle-to-axle options, the proven modular grip system, and integrated arrow rest mounting capabilities. Available in six Cera Kote® color options, along with two powder coat options.
Stratos 36 SVX
- 332 FPS (ATA)
- 36" Axle-to-Axle
- 7" Brace Height
- 4.7 LBS Mass Weight
- SVX Cam
- Draw Weights 30-40#, 40-50#, 45-55#, 50-60#, 55-65#, 60-70#
- Draw Lengths 23.5-25.5", 26-27", 27.5-28.5", 29-30", 30.5-31"
SVX CAMS
High-performance SVX cams feature interchangeable modules for increased efficiencies and speeds up to 328 fps. The SVX cam has a hard wall and is “ready to go” at full draw for those who pull hard through the shot.
HOYT | HYPER EDGE | COMPOUND BOW
Specifications:
Hoyt has built the top dog of tournament bows with the HyperEdge.
There are so many features that are built into the HyperEdge, it is destined to perform no matter what tournament it's entered into.
Starting with the modular grip system which gives the archer an ability to change the grip angle to desired aiming preferences. This is a fully customisable grip system allowing the bow to be perfectly tuned to the archer's specific hand position.
The DFX cam system incorporates two cable stops which make for a very solid back wall. If you're looking for absolutely no give at all, install the optional limb stop for a wall that simply will not budge.
At 36 inches axle to axle the UltraFlex Limbs and DFX Cam and a Half work in sync which actually allows a longer axle to axle at full draw. This makes the HyperEdge hold and aim like it's a 40 inch non parallel limb bow.
Hoyt added yet another feature to the HyperEge including the ZT cable guard into the bow. The ZT cable guard system is proven to eliminate torque at full draw and also increase smoothness in the draw cycle.
Top it off with a super forgiving brace height of 7 inches and an actual ATA speed of 325fps and the HyperEdge really has it all.
Smooth to draw, easy to aim, solid back wall and the adjustability to fine tune the bow will suit any style.
The stability of the Hyper Edge is incredible and after the shot there is minimum hand shock. Hoyt listened to archers around the world and have designed the ultimate in tournament bows.
Look out for the HyperEdge at the top of the leader board at archery tournaments across the globe.
Specs at a glance
ATA Speed 325fps
Weight range 30-40lbs, 40-50lbs, 50-60lbs, 60-70lbs. Please specify weight required.
Draw length range 25.5"-27.5", 27.5"-29.5", 29.5"-31.5". Please specify draw length
Brace height 7"
Axle to Axle 36"
Mass weight 4.5lbs
Let-Off 75%
DFX Cam & 1/2 Cam
Riser Aluminium
Ultra Flex Limb technology
Parallel split limb technology
Multi-layer limb lamination
Zero Torque Cable Guard system
Pro Lock Limb Pocket system
In-line roller cable guard
Perfect balance stabilisation system
Dual Cable Stops
Optional Limb Stop
Modular Grip System
Air Shox
Stealth Shot
Shock Rod
FUSE Strings and Cables
Available in Right Hand and Left Hand. Please specify RH or LH
Available in a standard hunting colour option of Black Out.
Custom Colour Accessories. Hoyt Stealth Shots, AirShox or LimbShox, Shock Rods and Pro Fit Wood Grip accessories are available in 9 great accent colours to customise your look. Components are sold individually, or in a custom 10 piece accessory kit.
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Custom Colour Accessories. Hoyt Stealth Shots, AirShox or LimbShox, Shock Rods and Pro Fit Wood Grip accessories are available in 9 great accent colours to customise your look. Components are sold individually, or in a custom 10 piece accessory kit.
Prices are Negotiable for Regular customers at many Products. Be our regular Customer. 
AVALON | TEC X MAXX | SIGHT SCOPE WITH LENS | COMPOUND BOW
PRODUCT DESCRIPTION
This model scope from Avalon comes supplied with mounted Pro Lens, fiber optic pin and a detachable sun shade. 29mm diameter. Choose from either red fiber or green fiber models in 2x, 4x, 6x or 8x lens options.Description
- 29mm housing excels for indoor 40 cm target faces
- Lens and lens retainer attached to the target side of the scope
- 10-32 Threaded rod compatibility with most target compound sights
- Vented scope housing with single up pin
- Red .019" fiber optic wrapped around the scope
Reviews
There are no reviews yet.