TRUBALL | OUTLAW XT | WRIST RELEASER | COMPOUND BOW
₹7,000.00

Destined to become #1 in the Power Buy wrist release category where popularity and value combine into exceptionally tough quality. The Outlaw XT features fully-independent standard caliper jaws, and is built X-tra Tough with machined knurling for added grip! The Red Rope Connection System (Green Rope Connector on Tactical Bowhunting edition) between the head and strap allows Quick and easy adjustment, reducing torque and increasing accuracy while also allowing the length of the release to be extremely short to fit smaller hands. All that release still tucks away easily into sleeve when not in use thanks to the wrist strap T-Connector.
Fully-independent Standard Caliper Jaws: Pull the trigger to open, let-up to close. Easy as that. The fully-independent jaws close to load silently and allow the d-loop to release evenly through the jaws as they open, resulting in lower torque. Every set of jaws are professionally tested before being packaged to make sure you get the best from the best.
“X-tra Tough” Textured Grip Design: Keep hold, hold steady, steady your aim, aim to win, win more with T.R.U.Ball’s “X-tra Tough” grip by never losing hold again.
Weather Resistant Connection: Flexible rubber tubbing runs from the head to the connector for added durability and weather resistance.
Red Rope Connector: Engineered for simplicity, the red rope connector can be easily adjusted by sliding the red anchor fitting out of place, feeding the rope through, and sliding the red anchor fitting back into place. As a rope connection, the flexibility of the connector reduces the torque induced onto the bowstring and the anchor allows the anchor point to be adjusted along the full length of the rope connection.
Wrist strap T-Connection: A solid aluminum connection between wrist strap and release, acting as the housing for the rope connector. The T-connector has been designed to fold smoothly like a hinge, allowing the release to be easily tucked into a sleeve when not in use and smoothly redeployed when needed.
Black Camo or Tactical Bowhunting Series Green Anodized head
Select between Camo Velcro® or Black Leather Buckle Strap, both are available in Junior, Large, and X-Large sizes.
NOTE:-
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Related products
HOYT | NEW | CONCEPT X | 37 | COMPOUND BOW
330 FPS (ATA)
4.75 Weight (lbs)
37" Axle-to-Axle
25"-31" Draw Length w/Spec Mod
7" Brace Height
26-29" Draw Length w/CDM Mod
NOTE: SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS SPECIFIC COLOR WOULD BE AVAILABLE ON SPECIAL ORDER Prices are Negotiable for Regular customers at many Products. Be our regular CustomerSANLIDA | X10 FINGER SLING
- Purpose: A finger sling connects the archer's thumb and forefinger to the bow grip, catching the bow after release to prevent it from dropping. This allows for a relaxed bow hand, which can help reduce bow torque and improve consistency.
- Benefits: Finger slings help support the bow's weight after the shot, provide feedback for controlling the bow's follow-through, and can enhance confidence, especially for beginners
SANLIDA | JANDAO STRING WAX
- Function: It's primarily used to protect bowstrings from wear and tear caused by friction, moisture, and the elements. This protection helps prevent fraying and extends the life of the bowstring.
- Properties: Sanlida Jandao string wax is formulated to be odorless and waterproof. The waterproof quality is particularly beneficial for archers who use their bows in outdoor conditions where moisture can degrade bowstring material.
- Application: To apply the wax, you typically rub the stick directly along the length of the bowstring. Some waxes come in a stick form, similar to a lipstick, which can be twisted from the base for application. It's crucial to thoroughly work the wax into the individual strands of the string by massaging it with your fingers. Using a piece of fabric cord or leather, rubbed along the string, can further help distribute the wax evenly and remove excess.
- Maintenance: It's generally recommended to apply string wax every 7-10 uses or whenever the bowstring feels dry. Regular application of string wax can significantly extend the life of your bowstring.
PSE | XPRESSION | COMPOUND BOW
SANLIDA | X8 RELEASE POUCH
- Secure Storage: This pouch is designed to keep your release aid and other small accessories safe during practice or hunting trips.
- Drawstring Closure: It features a drawstring closure for quick and easy access to your release aid, yet keeps the contents secured within the pouch.
- Padded Interior: The interior of the pouch is padded, providing an extra layer of protection against scratches and impacts.
- Belt Loop Attachment: The pouch can be conveniently attached to your quiver belt for easy access to your release aid at your preferred hip placement
PSE | FEVER | COMPOUND BOW
• The PSE Fever™ is the bow that takes youth bowhunting to the next level! • Thanks to PSE’s advanced split limb and cam technologies, this bow shoots at a speedy 304 fps. • It’s also highly adjustable for growing archers, going from 11” to 29” in draw length and switching from constant peak weight to grow-with-you adjustments.
Specifications • WEIGHT 4.713 LBS • BRACE HEIGHT 6-3/8" • AXLE TO AXLE 32" • ATA/IBO SPEED 304-296 FPS @ 29" • LETOFF 70% • MASS WEIGHT 3.6 LBS • DRAW LENGTH RANGE 11-1/2" TO 29" • HANDEDNESS RIGHT • DRAW WEIGHT 29#, 40#, 50#, 60# • DRAW LENGTH 29" • MAX. LIMB BOLT TURNS 12
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
RAMROD | XP | LONG BAR
RAMRODS XP LONG BAR – Specifications
| Specification | Details |
|---|---|
| Brand | RAMRODS |
| Model | XP Long Bar |
| Type | Recurve Bow Long Stabilizer |
| Available Lengths | 12", 15", 27", 30" |
| 30" Weight | 5.7 oz (approx. 162 g) |
| Damping | VIBRO-CORE Internal Damping |
| Purpose | Reduces vibration and improves shot response |
| Application | Recurve Archery |
| Construction | Lightweight stabilizer design |
| Riser Connection | Standard stabilizer mounting |
The manufacturer/seller information specifically confirms the 30" version at 5.7 oz, with 12", 15", 27" and 30" length options and VIBRO-CORE internal dampinG
NOTE:- SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS Prices are Negotiable for Regular customers at many Products. Be our regular Customer.HOYT | NEW CONCEPT | XTS 40 | TARGET COMPOUND BOW
HOYT CONCEPT XTS 40 — SPECIFICATIONS
| Specification | Correct Details |
|---|---|
| Model | Concept XTS 40 |
| Bow Type | Target Compound Bow |
| ATA Speed | 329 FPS |
| Mass Weight | 5.15 lbs |
| Axle-to-Axle | 40 inches |
| Brace Height | 7.25 inches |
| Draw Length – CDM Mod | 27–30 inches |
| Draw Length – Spec Mod | 26–32 inches |
| Draw Length – TDM Mod | 30–32 inches |
| Draw Weight Option | 50–60lbs |
| Cam System | SCTR 2.0 |
| Let-Off | 65%, 70%, 75% |
| Riser | Shoot-Through Riser |
| Limb System | TXL Limbs |
| Hand | Right Hand |


Reviews
There are no reviews yet.