SHIBUYA | ULTIMA OKULUS SCOPE | COMPOUND | SIGHT SCOPE
This state-of-the-art compound scope was developed with utmost care for balance, enabling it to fit to any configuration.
The brand new Gravity Shift technology enables the scope to compensate for shifting center of gravity when using the large variety of accessories, such as sun shades and decal rings. OKULUS strikes the balance for a wide array of use cases.
NOTE:
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Spec Table
| mass weight | Housing Set | 33.7g (Lens not included) |
|---|---|---|
| Front Sunshade | 11g | |
| Back Sunshade | 8.2g | |
| Decal Ring | 7.2g | |
| Active (inside) diameter | 29mm（27mm when used with front sunshade） | |
| Compatible Sights | Sights with No.10-32 scope thread | |
| Scope Attachmen | Adjustability | Available (GRAVITY SHIFT) |
| Adjustment increments | 2mm | |
| Adjustment Range | 4mm | |
| Sight Light Attachmenth Angles | vertical, 45degrees angled | |
| Lens | Type | Feather Vision Vitri Lens,Verde Plus Lens (sold separately) |
| Lens Diameter | 32mm | |
| Lens Diopter | +.50, +.75, +1.00（+.25, +.37, +.62, +.82 available for special order ） | |
| Material | Housing | 2000 series aluminum, color anodized. Machined anti-reflective grooves. |
| Lens Retainer Ring | ||
| Front Sunshade | ||
| Back Sunshade | ||
| Decal Ring | ||
| Scope Rod | Stainless Steel | |
| Level | Yellow (Red available separately) | |
| Color | Black | |
| Release Date | 2020 | |
| Included Accessories | GRAVITY SHIFT Balance Plate A, B Scope Rod (short, long) No. 10-32 Hex Nut 3/32" Hex Wrench Dual Color Dot Package Instructions Sheet | |
| Options | Front Sunshade Back Sunshade Decal Ring Fiber Kit (thicknesses: 0.019", 0.029") Scope Level RED | |
SHIBUYA | ULTIMA RC III | SIGHT | RECURVE BOW
SHIBUYA ULTIMA RCâ…¢
A new chapter in the history of the world’s most popular Target Recurve Sight.
The brand new ULTIMA RCIII Target Recurve Sight combines the proven features of the ULTIMA RCII and ULTIMA RC PRO sights to deliver a premium, yet affordable competition package.
FEATURES
Reduced mass weight and fine-tuned weight distribution
Â
Redesigned Sight Pin Locker
Sight Scale Plates
Ambidextrous Mount
Pressure-insert drive shaft dampening system
Improving on the original ULTIMA RC’s drive shaft support, the new dampening system, increasing contact area to avoid unwanted vibrations and sound upon the shot.
As a result, the ULTIMA RCÂ is the quietest, most consistent sight SHIBUYA has ever built!
X-Lock System US Pat No. 7,287,335
Re-adjustable, zero-tolerance fit between the windage unit and sight frame. Super-slick and durable polyacetal resin guide spacers enclose the elevation rail, re-adjustable at the turn of a set screw. All parts field-adjustable and -replaceable!
New, maximum grip dial finish
ULTIMA RCÂ sights feature completely reworked dials and mounting knobs, making every adjustment delightful and enabling the user to securely tighten the mounting knob more easily and securely than ever!
Easy and reliable fine adjustments
One of the most common requests we have had is a windage fine adjustment scale. The ULTIMA RCÂ sight now features a laser-engraved sight scale to make fine adjustments easier and reliable than ever!
NOTE:
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS
SPECIFIC COLOR WOULD BE AVAILABLE ON SPECIAL ORDER
Prices are Negotiable for Regular customers at many Products. Be our regular Customer
SHIBUYA | ULTIMA RC IV | RECURVE BOW SIGHT | RECURVE SIGHT
Product Specification Table
| Model | ULTIMA RCâ…£ | ULTIMA RC III | ULTIMA RC PRO G2 520-9 | |
|---|---|---|---|---|
| weight | 215g | 211g | 236g *including sight pin | |
| Aperture Distance (APD) | Maximum 249mm Minimum 83mm | Maximum 249mm Minimum 83mm | Maximum 249mm Minimum 83mm | |
| Elevation | method | Lockdown-less screw drive with jump mechanism | Lockdown-less screw drive with jump mechanism | Lockdown-less screw drive with jump mechanism |
| length | 132mm (approximately 5.2 inches) | 132mm (approximately 5.2 inches) | 132mm (approximately 5.2 inches) | |
| Range of motion | Approximately 107mm | Approximately 107mm | Approximately 107mm | |
| Movable step | 1 rotation = 1/32 inch (approximately 0.8 mm) | 1 rotation = 1/24 inch (approximately 1 mm) | 1 rotation = 1/32 inch (approximately 0.8 mm) | |
| 1 click = 1/640 inch (approximately 0.04 mm) | 1 click = 1/480 inch (approximately 0.05 mm) | 1 click = 1/640 inch (approximately 0.04 mm) | ||
| Tilt adjustment | Yes | Yes | Yes | |
| Vintage | Range of motion | 5.4mm | 5.4mm | 5.4mm |
| Movable step | 1 rotation = 1/32 inch (approximately 0.8 mm) | 1 rotation = 1/32 inch (approximately 0.8 mm) | 1 rotation = 1/32 inch (approximately 0.8 mm) | |
| 1 click = 1/640 inch (approximately 0.04 mm) | 1 click = 1/640 inch (approximately 0.04 mm) | 1 click = 1/640 inch (approximately 0.04 mm) | ||
| Compatible site pins | Screw size No.8-32 | Screw size No.8-32 | Screw size No.8-32 | |
| extension | length | 233mm (approximately 9 inches) | 233mm (approximately 9 inches) | 233mm (approximately 9 inches) |
| Adjustment Range | 6.5 inches (approx. 165 mm) | 6.5 inches (approx. 165 mm) | 2.4 inches (60 mm) | |
| Adjustment Steps | 0.5 inches (12.7 mm) | 0.5 inches (approximately 12.7 mm) | 0.47 inches (12 mm) | |
| Main materials | Elevation Department | 6000 series aluminum alloy | 6000 series aluminum alloy | 6000 series aluminum alloy |
| Box section | 6000 series aluminum alloy | 6000 series aluminum alloy | 6000 series aluminum alloy | |
| extension | carbon fiber | carbon fiber | carbon fiber | |
| color | Black, Gunmetal, Blue, Red | Black, Gunmetal, Blue, Red | Black, Gunmetal, Blue, Red | |
| Right/Low | Yes | Yes | Yes | |
| Release date | 2025 | 2022 | 2025 | |
| accessories | Sight soft case No. 10-24 Mount fixing screw Hexagonal wrench 1.5mm / 2.5mm / 3mm Blank tape | Sight soft case No. 10-24 Mount fixing screw Hexagonal wrench 1.5mm / 2.5mm / 3mm Blank tape | Sight soft case No. 10-24 Mount fixing screw Hexagonal wrench 1.5mm / 2.5mm / 3mm Blank tape | |
| Instruction manual *See the website via the QR code | Instruction manual Warranty card Parts diagram | Instruction manual *See the website via the QR code | ||
Note :Â
1. Special color & LH Sight available on only Special OrderÂ
2. Shipping Charges are extra as per actual BasisÂ
SHIBUYA | ULTIMA RC PRO | RECURVE’S SIGHT
SHIBUYA ULTIMA RC PRO features
- The Ultima RC PRO is the newest member of Shibuya's Ultima family.
- The extension bar is made of carbon and most of the other parts are made of light and strong aluminium.
- Attractive, modern polygonal extension bar design for even better damping and vibration control.
- The vertical threaded rod is suspended in a damped manner to prevent vibrations and noise.
- Sight block is guided over two diagonally mounted surfaces with plastic glides, thus no play between sight carriage and vertical bar.
- Large knob for quick adjustment or removal of the sight block.
- The quick adjustment screw has a larger contact surface to the extension bar and thus ensures that the extension bar is fixed even more securely.
- Fine adjustment of the vertical axis 1/480" (0.05 mm) per click.
- Fine adjustment of the horizontal axis 1/640" (0.04 mm) per click.
- There is a metal scale on both sides of the adjustment rail. One has a standard scale, the other is blank and can be labeled by you.
- The locking screw of the lateral coarse adjustment has been replaced by a thumb screw and can thus be loosened by hand.
SHIBUYA | ULTIMA RC PRO G2 | RECURVE BOW SIGHT | RECURVE SIGHT
Spec Table
Weight |
520-9: 236g (including sight pin)250-9: 233g (including sight pin) |
||
|---|---|---|---|
Aperture Distance (APD) |
Max 249mm / Min 83mm |
||
Elevation |
Drive System |
Lockdown-less Screw Drive with Jump Mechanism |
|
Length |
520-9: 132mm (approx. 5.2 inches)250-9: 63.5mm (approx. 2.5 inches) |
||
Travel Range |
520-9: approx. 107mm250-9: 41.9mm |
||
Movement Step |
1 rotation = 1/32 inch (approx. 0.8mm) |
||
1 click = 1/640 inch (approx. 0.04mm) |
|||
Tilt Adjustment |
Yes |
||
Windage |
Travel Range |
5.4mm |
|
Movement Step |
1 rotation = 1/32 inch (approx. 0.8mm) |
||
1 click = 1/640 inch (approx. 0.04mm) |
|||
Compatible Sight Pin |
Thread Size No.8-32 |
||
Extension |
Length |
233mm (approx. 9 inches) |
|
Adjustment Range |
2.4 inches (60mm) |
||
Adjustment Step |
0.5 inch (12.7mm) |
||
Main Materials |
Elevation Section |
6000-Series Aluminum Alloy |
|
Box Section |
6000-Series Aluminum Alloy |
||
Extension |
Carbon Fiber |
||
Color |
Black, Gunmetal, Blue, Red |
||
RH/LH |
Available |
||
Release |
2025 |
||
Included Accessories |
Soft Case for SightNo.10-24 Mounting ScrewHex Wrench (1.5mm / 2.5mm / 3mm)Blank Tape |
||
Instruction Manual |
|||
Note:
1. Special Color or LH Sight Available on Only Special OrderÂ
2. Shipping Charges are Extra as per Actual Basis
SHINY | CAP NOCKS (12 PC) | ARROWS & ACCESORIOS | NOCKS
- Type: Arrow nocks accessory.
- Quantity: Set of 12.
- Function: Secures arrow on string.
- Compatibility: Versatile fit.
- Material: Durable construction.
- Installation: Easy attachment.
- Purpose: Ensures consistent release.
- Options: Various colors/sizes.
- Usage: Essential for archery.
SHINY | PIN NOCK LARGE (25 PC) | ARROWS & ACCESORIOS | PIN NOCKS
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
SHINY| #1 NOCK (25 PC) | ARROWS & ACCESORIOS | PIN NOCKS
The #1 Nock is the industry standard for thin-diameter bowstrings.
-
Best For: Olympic Recurve shooters and traditional archers using low-strand-count strings (typically 12–14 strands).
-
Performance: Designed to provide a secure snap without over-pinching thin servings.
-
Tech Tip: Use this if you find that standard nocks feel "sloppy" or slide too freely up and down your center serving.
- NOTE:
- SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS Prices are Negotiable for Regular customers at many Products. Be our regular Customer
SHINY| #2 NOCK (25 PC) | ARROWS & ACCESORIOS | PIN NOCKS
The #2 Nock is the most versatile and widely used size in modern archery.
-
Best For: Most modern Compound bows and heavy-duty hunting setups.
-
Compatibility: Designed for standard-diameter bowstrings (typically 16–20+ strands).
-
Performance: Provides a consistent, friction-free release on thicker center servings. This is the "default" choice for the majority of recreational and competitive hunters.
- NOTE:
- SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS Prices are Negotiable for Regular customers at many Products. Be our regular Customer
SHINY| #H NOCK (25 PC) | ARROWS & ACCESORIOS | PIN NOCKS
The #H Nock refers specifically to the internal diameter of the arrow shaft rather than just the string groove.
-
Best For: 6mm (reduced diameter) carbon shafts, such as the Easton FMJ 6mm, Hexx, or Aftermath.
-
Fitment: Features a .231" – .234" shank diameter designed to fit snugly inside "H" sized shafts without the need for a bushong.
-
String Fit: Most #H nocks come standard with a Large Groove throat to accommodate modern hunting strings.
- NOTE:
- SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS Prices are Negotiable for Regular customers at many Products. Be our regular Customer
SHINY| PIN NOCK SMALL (25 PC) | ARROWS & ACCESORIOS | PIN NOCKS
- Designed for smaller diameter arrow shafts
- Comes in a pack of 25 for convenience
- Provides a secure fit and improved visibility