SHIBUYA | ULTIMA OKULUS SCOPE | COMPOUND | SIGHT SCOPE
₹35,000.00
This state-of-the-art compound scope was developed with utmost care for balance, enabling it to fit to any configuration.
The brand new Gravity Shift technology enables the scope to compensate for shifting center of gravity when using the large variety of accessories, such as sun shades and decal rings. OKULUS strikes the balance for a wide array of use cases.
Spec Table
| mass weight | Housing Set | 33.7g (Lens not included) |
|---|---|---|
| Front Sunshade | 11g | |
| Back Sunshade | 8.2g | |
| Decal Ring | 7.2g | |
| Active (inside) diameter | 29mm（27mm when used with front sunshade） | |
| Compatible Sights | Sights with No.10-32 scope thread | |
| Scope Attachmen | Adjustability | Available (GRAVITY SHIFT) |
| Adjustment increments | 2mm | |
| Adjustment Range | 4mm | |
| Sight Light Attachmenth Angles | vertical, 45degrees angled | |
| Lens | Type | Feather Vision Vitri Lens,Verde Plus Lens (sold separately) |
| Lens Diameter | 32mm | |
| Lens Diopter | +.50, +.75, +1.00（+.25, +.37, +.62, +.82 available for special order ） | |
| Material | Housing | 2000 series aluminum, color anodized. Machined anti-reflective grooves. |
| Lens Retainer Ring | ||
| Front Sunshade | ||
| Back Sunshade | ||
| Decal Ring | ||
| Scope Rod | Stainless Steel | |
| Level | Yellow (Red available separately) | |
| Color | Black | |
| Release Date | 2020 | |
| Included Accessories | GRAVITY SHIFT Balance Plate A, B Scope Rod (short, long) No. 10-32 Hex Nut 3/32″ Hex Wrench Dual Color Dot Package Instructions Sheet |
|
| Options | Front Sunshade Back Sunshade Decal Ring Fiber Kit (thicknesses: 0.019″, 0.029″) Scope Level RED |
|
NOTE:
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Related products
EASTON | XX75 CAMO HUNTER | ARROWS | DOZ
SPECIFICATION:-
-
Material: 7075-T9 aluminum alloy
-
Tensile Strength: 96,000 psi
-
Straightness Tolerance: ± 0.002″
-
Weight Tolerance: ± 1% (as per some retailers)
-
Finish: Hard-anodized 4-tone camouflage (also described as “easy-draw finish”)
Inserted Components: Pre-installed UNI bushings and included RPS inserts; nocks installed (Super Nock for most spines, X Nock for 1816 & 1916 models)
Shaft Spine & Dimension Table
Here’s a consolidated overview of the spine options with their specs:
| Model (Spine) | Shaft Weight (GPI) | Deflection @ 28″ (inches) | Stock Length | Nock | Insert Weight |
|---|---|---|---|---|---|
| 1816 | 9.3 | 0.756 | 30″ | X Nock | 12 gr |
| 1916 | 10.0 | 0.623 | 31″ | X Nock | 15 gr |
| 2013 | 9.0 | 0.610 | ~32⅜″ | Super Nock | 21 gr |
| 2016 | 10.6 | 0.531 | 32″ | Super Nock | 23 gr |
| 2018 | 12.3 | 0.464 | ~30⅜″ | Super Nock | 22 gr |
| 2114 | 9.9 | 0.510 | ~31⅛″ | Super Nock | 25 gr |
| 2117 | 12.0 | 0.407 | ~31⅜″ | Super Nock | 29 gr |
| 2213 | 9.8 | 0.458 | ~31⅜″ | Super Nock | 34 gr |
| 2215 | 10.7 | 0.419 | 31½″ | Super Nock | 34 gr |
| 2216 | 12.0 | 0.376 | 31¾″ | Super Nock | 34 gr |
| 2219 | 13.8 | 0.337 | 32″ | Super Nock | 31 gr |
| 2317 | 13.3 | 0.303 | ~32⅛″ | Super Nock | 42 gr |
| 2413 | 10.4 | 0.372 | ~32½″ | Super Nock | 40 gr |
MAXIMAL | THE PISTOL | SLINGSHOT
Slingshot is most-advanced slingshot, featuring a top-line, fully adjustable wrist support with improved angle for stability and extra power, a thick molded, ergonomic handle and surgical latex tubing and rugged release pouch.
-
Ergonomic pistol grip (thick, molded handle).
-
Adjustable wrist support / armrest (top-line, adjustable angle for stability and added power).
-
Uses round surgical-style latex tubing (replaceable rubber bands) and a rugged pouch for ammo.
-
Designed for increased accuracy and comfort; marketed as an “advanced” / adjustable pistol slingshot.
SANLIDA | RISER COVER
Sanlida Riser Cover is designed to protect your recurve bow riser from dust, scratches, and minor impacts during storage and transport. Made from durable, lightweight material with a soft inner lining, it ensures your riser remains safe and well-maintained. Easy to use and compact, this cover is ideal for practice, travel, and daily protection.
-
Brand: Sanlida
-
Product: Riser Cover
-
Suitable for: Recurve bow risers
-
Protects against dust, scratches & minor impacts
-
Durable and lightweight material
-
Soft inner lining for added safety
-
Ideal for storage and travel
- NOTE:
- SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASISSPECIFIC COLOR WOULD BE AVAILABLE ON SPECIAL ORDER Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
FIVICS | LIMBS OR SHOE PROTECTOR | ARCHERY ACCESSORIES
Fivics Limb Protector
- Made from durable silicon rubber in an eye catching design
- Worn on your shoe to protect both it and your limbs tip when nocking your arrow or when bow is at rest
- Stud fastener to easily loop around your shoe lace to hold in place
- Available in three colours to suit your mood or match your kit.
- NOTE:
- SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS Prices are Negotiable for Regular customers at many Products. Be our regular Customer
HOYT | NEW | CONCEPT X | 40 | COMPOUND BOW
The Hoyt Concept X 37 and 40 represent the exceptional engineering archers expect from Hoyt. With a riser, limb system, and cam system all designed to complement each other, the Concept X gives shooters an extremely stable foundation for seeking out target archery perfection.
Starting with a riser that minimizes rotational translation, adding a limb system that is the most torsionally stable we have ever designed, and wrapping it up with the SCTR cams - the culmination of two decades of Hoyt Cam & 1/2 and HB cam systems rolled into one. The Concept X beats the standards you expect from Hoyt.
327 FPS (ATA)
4.9 Weight (lbs)
40" Axle-to-Axle
26"-32" Draw Length w/Spec Mod
7.25" Brace Height
27-30" Draw Length w/CDM Mod
NOTE: SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS SPECIFIC COLOR WOULD BE AVAILABLE ON SPECIAL ORDER Prices are Negotiable for Regular customers at many Products. Be our regular Customer
PSE | XPRESSION | COMPOUND BOW
Specifications: The PSE Xpression compound bow is engineered with PSE's new Wide-Track Target Limb System and built on a 7075 aluminium riser. This bow is amazingly accurate and fires like a dream. For those who need a great target bow to blow the competition away, the PSE Xpression is a great option to check out.The cam system used for the Xpression is called the Drive Style Target Cam System. There's not much to talk about this cam system, other than how it provides a silky smooth shots and a wonderful amount of adjustability. The bow is capable of firing of up to 316 fps and the draw length ranges from 26 – 31.5". The draw weight ranges from 50 lbs to 70 lbs.Now, where the cams control the smoothness of the shot, the limb pockets improve the speed. This bow features Wedge Lock Limb pockets which are easy to adjust and allow the arrows to fire faster. There are other features that can be added onto this bow, including: a cable stop, limb stop, or aftermarket hard stop.The bow's finish is coated with high-polish corrosion-resistance. The colours available include: Black, Blue, Pearl White, Polished Titanium and Red.The Xpression has been part of the line up for a number of years now and has again been added to the 2016 season's bows as an integral part of the Pro Series of bows.PSE Xpression Bow SpecsDraw Weights : 50, 60, 70 lbsDraw Lengths : 26-231.5"Axle to Axle : 40"Brace Height : 7 1/8”Mass Weight : 4.9 lbsEffective Let Off : 65%/ 75%IBO Speed : 308-316 fpsPrices are Negotiable for Regular customers at many Products. Be our regular Customer.
PSE | FEVER | COMPOUND BOW
• The PSE Fever™ is the bow that takes youth bowhunting to the next level! • Thanks to PSE’s advanced split limb and cam technologies, this bow shoots at a speedy 304 fps. • It’s also highly adjustable for growing archers, going from 11” to 29” in draw length and switching from constant peak weight to grow-with-you adjustments.
Specifications • WEIGHT 4.713 LBS • BRACE HEIGHT 6-3/8" • AXLE TO AXLE 32" • ATA/IBO SPEED 304-296 FPS @ 29" • LETOFF 70% • MASS WEIGHT 3.6 LBS • DRAW LENGTH RANGE 11-1/2" TO 29" • HANDEDNESS RIGHT • DRAW WEIGHT 29#, 40#, 50#, 60# • DRAW LENGTH 29" • MAX. LIMB BOLT TURNS 12
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
AAE | MAX 2.0 | SHIELD CUT | VANES (100Pc)
- Length: 2.0″
- Height: .330″
- Grain Wt: 3.9
- (100pc)
Reviews
There are no reviews yet.