New
TRUBALL | OUTLAW XT | WRIST RELEASER | COMPOUND BOW
₹7,000.00
Destined to become #1 in the Power Buy wrist release category where popularity and value combine into exceptionally tough quality. The Outlaw XT features fully-independent standard caliper jaws, and is built X-tra Tough with machined knurling for added grip! The Red Rope Connection System (Green Rope Connector on Tactical Bowhunting edition) between the head and strap allows Quick and easy adjustment, reducing torque and increasing accuracy while also allowing the length of the release to be extremely short to fit smaller hands. All that release still tucks away easily into sleeve when not in use thanks to the wrist strap T-Connector.
Fully-independent Standard Caliper Jaws: Pull the trigger to open, let-up to close. Easy as that. The fully-independent jaws close to load silently and allow the d-loop to release evenly through the jaws as they open, resulting in lower torque. Every set of jaws are professionally tested before being packaged to make sure you get the best from the best.
“X-tra Tough” Textured Grip Design: Keep hold, hold steady, steady your aim, aim to win, win more with T.R.U.Ball’s “X-tra Tough” grip by never losing hold again.
Weather Resistant Connection: Flexible rubber tubbing runs from the head to the connector for added durability and weather resistance.
Red Rope Connector: Engineered for simplicity, the red rope connector can be easily adjusted by sliding the red anchor fitting out of place, feeding the rope through, and sliding the red anchor fitting back into place. As a rope connection, the flexibility of the connector reduces the torque induced onto the bowstring and the anchor allows the anchor point to be adjusted along the full length of the rope connection.
Wrist strap T-Connection: A solid aluminum connection between wrist strap and release, acting as the housing for the rope connector. The T-connector has been designed to fold smoothly like a hinge, allowing the release to be easily tucked into a sleeve when not in use and smoothly redeployed when needed.
Black Camo or Tactical Bowhunting Series Green Anodized head
Select between Camo Velcro® or Black Leather Buckle Strap, both are available in Junior, Large, and X-Large sizes.
CLICK HERE for Bandit Rope Connection Instructions
Related products
SANLIDA | X10 | COMPOUND DAMPER | FOR COMPOUND BOW
Sanlida X10 Compound Damper
New damper system designed for use with compound bows. The Sanlida X10 Compound Damper is 284g of adjustable weights with a central rubber filled segment (the black bit) to provide ample dampening and vibration reduction for most compound bow setups. Each damper includes a single 28g, a double 56g and a quadruple 112g disk weight which can be added to or removed to suit your particular needs. Standard model as factory supplied weighs 284g and measures 72mm length x 30mm diameter. Additional Sanlida X10 Disk Weights and Disk Weight Screws are available separately. Features:- Colour: Black / Silver
- Materials: Aluminium, rubber, stainless steel
- Weight: 284g
- Dimensions: 72mm length x 30mm diameter
- Designed for compound bows
- Made in China
CARTEL | 207 | SIGHT SCOPE | COMPOUND BOW
Cartel scope made of a light-weight aluminum housing. An anti-reflective coating is applied to the lens, which doesn't only protect you from glare in your aiming picture but also offers slight protection against scratches on the surface of the glass.
Specifications Cartel 207 Scope:
- Aluminum housing
- Lens with anti-reflection coating
- 30 mm diameter
- Standard 10/32 thread
- Available magnification: .50 (x4), .75 (x6), 1.0 (x8)
- Suited for both right- and left-handed archers
- Dots are not included
HOYT | HYPER EDGE | COMPOUND BOW
Specifications:
Hoyt has built the top dog of tournament bows with the HyperEdge.
There are so many features that are built into the HyperEdge, it is destined to perform no matter what tournament it's entered into.
Starting with the modular grip system which gives the archer an ability to change the grip angle to desired aiming preferences. This is a fully customisable grip system allowing the bow to be perfectly tuned to the archer's specific hand position.
The DFX cam system incorporates two cable stops which make for a very solid back wall. If you're looking for absolutely no give at all, install the optional limb stop for a wall that simply will not budge.
At 36 inches axle to axle the UltraFlex Limbs and DFX Cam and a Half work in sync which actually allows a longer axle to axle at full draw. This makes the HyperEdge hold and aim like it's a 40 inch non parallel limb bow.
Hoyt added yet another feature to the HyperEge including the ZT cable guard into the bow. The ZT cable guard system is proven to eliminate torque at full draw and also increase smoothness in the draw cycle.
Top it off with a super forgiving brace height of 7 inches and an actual ATA speed of 325fps and the HyperEdge really has it all.
Smooth to draw, easy to aim, solid back wall and the adjustability to fine tune the bow will suit any style.
The stability of the Hyper Edge is incredible and after the shot there is minimum hand shock. Hoyt listened to archers around the world and have designed the ultimate in tournament bows.
Look out for the HyperEdge at the top of the leader board at archery tournaments across the globe.
Specs at a glance
ATA Speed 325fps
Weight range 30-40lbs, 40-50lbs, 50-60lbs, 60-70lbs. Please specify weight required.
Draw length range 25.5"-27.5", 27.5"-29.5", 29.5"-31.5". Please specify draw length
Brace height 7"
Axle to Axle 36"
Mass weight 4.5lbs
Let-Off 75%
DFX Cam & 1/2 Cam
Riser Aluminium
Ultra Flex Limb technology
Parallel split limb technology
Multi-layer limb lamination
Zero Torque Cable Guard system
Pro Lock Limb Pocket system
In-line roller cable guard
Perfect balance stabilisation system
Dual Cable Stops
Optional Limb Stop
Modular Grip System
Air Shox
Stealth Shot
Shock Rod
FUSE Strings and Cables
Available in Right Hand and Left Hand. Please specify RH or LH
Available in a standard hunting colour option of Black Out.
Custom Colour Accessories. Hoyt Stealth Shots, AirShox or LimbShox, Shock Rods and Pro Fit Wood Grip accessories are available in 9 great accent colours to customise your look. Components are sold individually, or in a custom 10 piece accessory kit.
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Custom Colour Accessories. Hoyt Stealth Shots, AirShox or LimbShox, Shock Rods and Pro Fit Wood Grip accessories are available in 9 great accent colours to customise your look. Components are sold individually, or in a custom 10 piece accessory kit.
Prices are Negotiable for Regular customers at many Products. Be our regular Customer. 
AVALON | POWR | 6″ | CARBON SIGHT | COMPOUND BOW
Avalon's new Powr Carbon Compound sight.
Featuring a carbon bar with aluminium vertical height bar.
Available in either 6" or 9" carbon bar.
HOYT | NEW | CONCEPT X | 37 | COMPOUND BOW
The Hoyt Concept X 37 and 40 represent the exceptional engineering archers expect from Hoyt. With a riser, limb system, and cam system all designed to complement each other, the Concept X gives shooters an extremely stable foundation for seeking out target archery perfection.
Starting with a riser that minimizes rotational translation, adding a limb system that is the most torsionally stable we have ever designed, and wrapping it up with the SCTR cams - the culmination of two decades of Hoyt Cam & 1/2 and HB cam systems rolled into one. The Concept X beats the standards you expect from Hoyt.
330 FPS (ATA)
4.75 Weight (lbs)
37" Axle-to-Axle
25"-31" Draw Length w/Spec Mod
7" Brace Height
26-29" Draw Length w/CDM Mod
Shipping Charges are Extra as per Actual Basis
FIVICS | LIMBS OR SHOE PROTECTOR | ARCHERY ACCESSORIES
Fivics Limb Protector
- Made from durable silicon rubber in an eye catching design
- Worn on your shoe to protect both it and your limbs tip when nocking your arrow or when bow is at rest
- Stud fastener to easily loop around your shoe lace to hold in place
- Available in three colours to suit your mood or match your kit.
SHIBUYA | ULTIMA CPXIII | SIGHT | COMPOUND BOW
FEATURES
SIGHT SCALE PLATES
MAGNIFIER COMPATIBLE
The Scale Magnifier mounts to the flat shelf indicator’s groove, enabling higher precision elevation adjustments than ever.
(sold separately)
ZPE SYSTEM【Patent pending】
ULTIMA CPX sights feature a revolutionary system eliminating backlash and play in the elevation adjustments: the ZPE system. A readjustable aluminum wedge, secured with Nord-Lock® washers, eliminates any gap between the threaded locking block and aperture block.
FLAT SHELF INDICATOR PIN
The new flat-shelf indicator pin on ULTIMA CPX sights is easy to adjust, closer to the sight tape surface than ever before, while still offering enough clearance for layered tapes. Both side pins are locked by a cap screw from the side, preventing accidental movements when locking them down!
TRIA-LOCK SYSTEM
Shibuya’s innovative Tria-Lock system keeps the scope rod approx. 1/2″ closer to the elevation bar than conventional target sights. This significantly reduces moment effected on the windage unit – a significant factor in development of play and faults!
The innovative new Tria-Lock system encloses the scope rod holder from three sides, keeping it perfectly aligned and without play to produce a rattle-free, zero-tolerance environment.
X-Lock System US Pat No. 7,287,335
Re-adjustable, zero-tolerance fit between the windage unit and sight frame. Super-slick and durable polyacetal resin guide spacers enclose the elevation rail, re-adjustable at the turn of a set screw. All parts field-adjustable and -replaceable!
ACTIVE ARCHERY | BOW STAND | COMPOUND BOW
Convenient, folding bow stand fits in your quiver.
- Lightweight
- Folds up to fit in your pocket
- Lightweight, compact, folding kick stand for all bows
- Spring-loaded to stay on bow
- Bow rests on stand and stabilizer, keeps cam out of the dirt
Reviews
There are no reviews yet.