SIZE | 12", 30" |
---|
RAMRODS | VEKTOR | LONG & SHORT BARS
₹12,500.00 – ₹22,500.00
Description
The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market.
The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56 inch to 0.5 inch taper.
Features
-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~90
-Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots in proximal endcap for tightening with a wide range of common tools.
-Made in the USA | designed and hand-built by the owners
-30″ Vektor with standard VIBRO-CORE weighs 5.6oz and with Tungsten Damping weighs 8.6oz
Related products
RAMRODS | BEAST | LONG & SHORT BAR
Description
Features
RAMRODS K2 V2.1 STABILIZER- SHORTS
- Adaptive Weight System – allows for either 1/4-20 or 5/16-24 thread sizes by swapping out the adapter screw.
- VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
- Diameter – 0.5625"
- 5/16-24 threads on both proximal and distal endcap.
- Aluminum proximal and distal endcaps.
- Flat slots in proximal and distal endcaps for stabilizer tightening with a wide range of common tools.
- Made in the USA - designed and hand-built by the owners.
WIAWIS | ACS-EL | SHORT BAR
SHORT BAR LENGHT:
10 inches (74g) 11 inches (77g) 12 inches (80g) 14 inches (84g) 15 inches (86g)Description:
- Features graphene carbon to improve overall stiffness
- Strong end-caps increase strength in the stabilizer system
- Tapered internal design also improves dampening properties
- Weight system is 1/4" x 20
- Slim profile decreases wind drag for improved outdoor performance
- Includes:
- 1 Bottom flat weight 45 grams | 1.59 ounces
- 1 Head weight 45 grams | 1.59 ounces
DECUT | CROWN SHORT ROD | RECURVE’S | SHORT STABILIZERS
Description
- One 30” Long Rod
- Two 10” Side Rods
- One 4” Extension
- One V-Bar Mount
SHREWD | 600 PRO CARBON | RECURVE’S | SHORT STABILIZERS
-
Further Information
Information supplied courtesy of Shrewd Archery
- Thin walled, high modulus, sealed carbon, creates a very light but stiff stabilizer
- Machined aluminium end caps and stainless steel fastners
- Many lengths available (click on "see all items" below to show the full range)
- Internal rubber dampening
- Comes with 3x 1 oz. steel end weights and 2x 1/3 oz aluminium end weights (total of 5 end weights) as standard
- Standard stainless steel threaded rod allows for adding as many as 9 weights per stabilizer without additional threads
- Outside diameter of the stabilizer is .600"
AVALON | TEC X CARBON | RECURVE’S | SHORT STABILIZERS
-
The tec X Olympic 22mm stabiliser from Avalon. Made of high modulus carbon, combining a stiff action with very good damping qualities. Available in:
- Front stabiliser lengths: 28", 30" and 32"
- Side stabiliser lengths: 10", 12" and 15"
FUSE | CARBON BLADE | RECURVE’S | SHORT STABILIZERS
- Brand: Fuse
- Product Name: Carbon Blade
- Bow Type: Recurve
- Functionality: Short stabilizer for vibration reduction and balance
- Material: Carbon construction for lightweight and durability
- Design: Sleek and aerodynamic
- Compatibility: Suitable for recurve bows
Reviews
There are no reviews yet.