| SIZE | 12", 30" |
|---|
RAMRODS | VEKTOR | LONG & SHORT BARS
₹16,500.00 – ₹26,500.00Price range: ₹16,500.00 through ₹26,500.00
Description
The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market.
The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56 inch to 0.5 inch taper.
Features
-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~90
-Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots in proximal endcap for tightening with a wide range of common tools.
-Made in the USA | designed and hand-built by the owners
-30″ Vektor with standard VIBRO-CORE weighs 5.6oz and with Tungsten Damping weighs 8.6oz
Related products
RAMRODS | ULTRA V4 | SHORT BAR | SHORT STABILIZER
Ultra v4
DECUT | CROWN SHORT ROD | RECURVE’S | SHORT STABILIZERS
Description
- One 30” Long Rod
- Two 10” Side Rods
- One 4” Extension
- One V-Bar Mount
RAMRODS K2 V2.1 STABILIZER- SHORTS
- Adaptive Weight System – allows for either 1/4-20 or 5/16-24 thread sizes by swapping out the adapter screw.
- VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
- Diameter – 0.5625"
- 5/16-24 threads on both proximal and distal endcap.
- Aluminum proximal and distal endcaps.
- Flat slots in proximal and distal endcaps for stabilizer tightening with a wide range of common tools.
- Made in the USA - designed and hand-built by the owners.
WNS | SMC CARBON | SHORT BAR | STABILIZER SET | RECURVE BOW
FIVICS |SKADI-BX |SHORT STABILIZER
- Manufactured with an advanced blow method that enhances the strength of the carbon shaft and allows for more energy to be absorbed
- Crosswind Zero design enables stable aiming even in unpredictable winds
- The end of the carbon stabilizer tapers to a 17mm diameter without adding a metal cap.
- Center diameter of 13.5mm
- Super Graphite prepreg carbon
- Weight: 98g (12”)
- DC1500s Damper and 78g Weight Stack Included
- Each Sold Separately
WNS | SMC CARBON | LONG STABILIZER | RECURVE BOW
WNS SMC Long Bar
AAE | STREET HOT RODZ CARBON | RECURVE’S | SHORT STABILIZERS PER PCS
DESCRIPTION
FIVICS | FORNIX 14 | SHORT BAR | FOR RECURVE STABILIZER SET
DESCRIPTION
- Diameter: 14.55mm
- 4mm thick
- High-elastic, 40ton carbon fiber
- Vibration is dampened through unique carbon material only found in Fivics products
- Weight: 108g (12”)
- DC1500s Damper and 78g Weight Stack Included
- Each Sold Separately



Reviews
There are no reviews yet.