RAMRODS K2 V2.1 STABILIZER- SHORTS
₹16,000.00
Ramrods K2 V2 Stabiliser Series – A Small Diameter Competition Stabiliser Based On The Original, Very Popular, K2 Design. Ramrods Has Updated The Graphics And Endcaps, Added Internal Damping, And Optimized Its Stiffness And Shot Response Based On Archers’ Feedback.
Standard features of the Ultra:
- Adaptive Weight System – allows for either 1/4-20 or 5/16-24 thread sizes by swapping out the adapter screw.
- VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
- Diameter – 0.5625″
- 5/16-24 threads on both proximal and distal endcap.
- Aluminum proximal and distal endcaps.
- Flat slots in proximal and distal endcaps for stabilizer tightening with a wide range of common tools.
- Made in the USA – designed and hand-built by the owners.
Category: SHORT STABILIZERS
Related products
CARTEL | MAXION CARBON | LONG BAR | STABILISER SET | RECURVE & COMPOUND BOW
₹3,500.00
This is a good choice for either compound or recurve archers who want a lightweight stabilizer that will kill vibration, at an affordable price. If you decide you want to increase your end weight, the threaded cap accepts add-on weights. • Versatile, mid-range stabilizer at a great value • High modulus full carbon construction • Outside diameter: 17mm • Includes CX500 damper weight for enhanced dampening • Weight: 26" (3.6 oz.), Weight: 28" (3.7 oz.), Weight: 30" (3.9 oz.),
Cartel Maxion Carbon Stabilizer:
The Maxion Carbon is a highly versatile 17mm diameter mid-range carbon stabilizer at an incredibly low price. Constructed from high modulus carbon. It features an integral CX500 damper weight for enhanced dampening properties and is available in black, blue and red colours with a fresh new design.- Lengths:
- 26in
- 28in
- 30in
- Colours:
- Black
- Blue
- Red
- Material: High modulus carbon
- Diameter: 17mm
- Threads: 5/16in base / 1/4in end
- CX500 damper weight included
SHREWD | 600 PRO CARBON | RECURVE’S | SHORT STABILIZERS
₹8,900.00
-
Further Information
Information supplied courtesy of Shrewd Archery
- Thin walled, high modulus, sealed carbon, creates a very light but stiff stabilizer
- Machined aluminium end caps and stainless steel fastners
- Many lengths available (click on "see all items" below to show the full range)
- Internal rubber dampening
- Comes with 3x 1 oz. steel end weights and 2x 1/3 oz aluminium end weights (total of 5 end weights) as standard
- Standard stainless steel threaded rod allows for adding as many as 9 weights per stabilizer without additional threads
- Outside diameter of the stabilizer is .600"
AVALON | TEC X CARBON | RECURVE’S | SHORT STABILIZERS
₹3,000.00
-
The tec X Olympic 22mm stabiliser from Avalon. Made of high modulus carbon, combining a stiff action with very good damping qualities. Available in:
- Front stabiliser lengths: 28", 30" and 32"
- Side stabiliser lengths: 10", 12" and 15"
EPIC ARCHERY | STONIC PLUS | CARBON SHORT BAR | RECURVE STABILISER SET | RECURVE BOW
₹3,000.00
Epic Stonic Plus Short Rod
The Epic Stonic Plus (2021) is an upgraded version of the Stonic Plus stabilizer with a new applied vibration suppression technology for enhancing the performance. Added weights and damper for maximizing dampening effects. This model is produced from a premium carbon shaft. 17mm diameter. Available in a selection of matt colours. Made in Korea.- Material: Premium Carbon shaft
- Colours: Matt Black, Matt Blue, Matt Red
- Diameter: 17mm
- Lengths: 10in, 12in
- Weights and damper included
- Threads: 5/16in (V bar end), 1/4in (weight end)
- Made in Korea
WIN&WIN | WIAWIS | HMC PLUS CARBON | RECURVE’S | SHORT STABILIZERS
₹6,600.00
Recurve archers strive for higher arrow speeds, but this results in increased vibration in the bow.
Up until now, stabilisers have not been able to effectively deal with this. Win & Win specifically designed the HMC Plus to address this issue. The system also improves dampening, absorbs shock and helps control torque during shooting.
While other stabilisers have a consistent wall thickness along their length that does not fully absorb vibration, the wall thickness of HMC Plus varies.
At the front of the rod the wall is 0.0275” (0.7mm) thick, gradually growing to 0.0787” (2mm) at the base. When installed with an extender as a full stabilisation system, HMC Plus effectively absorbs the shock produced by shooting a recurve bow.
FEATURES:
- Varying wall thickness for vibration absorption.
- Designed to be shot as a full system with extender
- Length: 10", 11", 12"
- Weight: 141g, 145g, 156g
- Colours: Matte Black, Black, Gold/Black, Blue, Red, White
SHREWD | REV-X | SHORT BAR | RECURVE BOW
₹16,500.00
FEATUERS
- The RevX series stabilizer was designed to be a multi-discipline stabilizer that transcends what previously had been designed for the compound and recurve markets.
- Utilizing Shrewd’s proprietary .630” diameter STS carbon the RevX series stabilizers bridge the gap between recurve and compound archers to create a stabilizer system that is just as capable at winning Olympic medals as it is dominating 3D podiums.
- STS carbon utilizes an internally tapered carbon composite that maximizes rigidity while minimizing overall stabilizer weight. The internal addition of Shrewd’s signature Truss Dampening System combines with the STS carbon to produce a stabilizer with unrivaled dampening abilities.
- Stabilizer length is measured from end cap to end cap and does not include stabilizer weights. Included weight stack adds 1.5" to overall stabilizer length.
WNS BY WIN&WIN | SAT CARBON | RECURVE | SHORT STABILIZERS
₹2,500.00
- WNS SAT Stabilizer Short RodThe beginners stabilizer by WNS has a great value for money. This simple stabilizer is made of carbon and aluminium which absorbs most vibrations. This stabilizer comes with one weight and a damper, to adjust it to your preferences. It is available in different lengths and colours.
-
SHORT 10, 12”
Reviews
There are no reviews yet.