SIZE | 10", 12", 30" |
---|
RAMRODS | BEAST | LONG & SHORT BAR
₹16,500.00 – ₹26,500.00
Description
The Beast is the stabilizer of choice for compound athletes at the top of their game. RamRods athletes Jozef Bosansky world #2, Jyothi Vennam world #4, and many more have been absolutely crushing on the international stage, with podiums at the World Championships and World Cup 1 & 3.
The Beast began with one question, how can we make a stabilizer that is stiff enough to feel great at 50oz+ while also being highly wind efficient and vibration free? After over a year of intense research, design, and testing we are excited to share the answer.
The Beast provides compound athletes with stiffness and weight capacity that will exceed the expectations of even the most demanding shooters. Yet it remains the most wind efficient product on the market at this level of stiffness. This is accomplished through the RamRods Wind Taper which provides more stiffness at the base where the stabilizer experiences the most stress, and slims down at the tip to reduce wind drag in the area of most wind torque.
In addition to best-in-class stiffness and wind efficiency, the Beast destroys vibration and resonance through VIBRO-CORE internal damping (standard on all models) and the option to upgrade to Tungsten damping for next level vibration reduction and improved front of center.
The Beast is ideal for compound athletes using moderate to heavy mass weight. The recommended weight ranges for the front stabilizer are 15-20oz for crisp feel, 21-50oz for ideal feel, 51oz+ for softer feel. This recommended weight range does not account for dampers or decouplers – mass weight that the stabilizer can handle increases when using dampers between weights or between the stabilizer and the weights. Side rods can handle roughly double the mass weight for similar reactions.
If you’re a compound athlete ready to unleash your performance then look no further than the Beast.
Features
-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~51
-Diameter – Long Rod 0.75 in to 0.56 in Taper Side Rod – 0.63 in to 0.56 in taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots and Through-Hole in proximal endcap for stabilizer tightening.
-Made in the USA | designed and hand-built by the owners
-30 in Beast with standard VIBRO-CORE weighs 6.9oz and with Tungsten Damping weighs 9.7oz
Related products
FIVICS | FORNIX 14 | SHORT BAR | FOR RECURVE STABILIZER SET
DESCRIPTION
- Diameter: 14.55mm
- 4mm thick
- High-elastic, 40ton carbon fiber
- Vibration is dampened through unique carbon material only found in Fivics products
- Weight: 108g (12”)
- DC1500s Damper and 78g Weight Stack Included
- Each Sold Separately

RAMRODS | XP | LONG & SHORT BAR
XP STABILIZER OVERVIEW
ADDITIONAL INFORMATION
FIVICS |SKADI-BX |SHORT STABILIZER
- Manufactured with an advanced blow method that enhances the strength of the carbon shaft and allows for more energy to be absorbed
- Crosswind Zero design enables stable aiming even in unpredictable winds
- The end of the carbon stabilizer tapers to a 17mm diameter without adding a metal cap.
- Center diameter of 13.5mm
- Super Graphite prepreg carbon
- Weight: 98g (12”)
- DC1500s Damper and 78g Weight Stack Included
- Each Sold Separately

SHREWD | REV-X | SHORT BAR | RECURVE BOW
FEATUERS
- The RevX series stabilizer was designed to be a multi-discipline stabilizer that transcends what previously had been designed for the compound and recurve markets.
- Utilizing Shrewd’s proprietary .630” diameter STS carbon the RevX series stabilizers bridge the gap between recurve and compound archers to create a stabilizer system that is just as capable at winning Olympic medals as it is dominating 3D podiums.
- STS carbon utilizes an internally tapered carbon composite that maximizes rigidity while minimizing overall stabilizer weight. The internal addition of Shrewd’s signature Truss Dampening System combines with the STS carbon to produce a stabilizer with unrivaled dampening abilities.
- Stabilizer length is measured from end cap to end cap and does not include stabilizer weights. Included weight stack adds 1.5" to overall stabilizer length.
FUSE | TAPER CARBON | RECURVE’S | SHORT STABILIZERS
- From Cartel-Doosung.
- The Maxion Carbon Short Stabilizer is a highly versatile 17mm diameter mid-range carbon stabilizer at great value and price.
- Features integral the CX500 damper with weight for enhanced dampening property.
- Available in Black, Blue and Red.
- Sizes: 10", 12"
- Note: Stabilizer length is carbon rod length excluding the weight.
RAMRODS K2 V2.1 STABILIZER- SHORTS
- Adaptive Weight System – allows for either 1/4-20 or 5/16-24 thread sizes by swapping out the adapter screw.
- VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
- Diameter – 0.5625"
- 5/16-24 threads on both proximal and distal endcap.
- Aluminum proximal and distal endcaps.
- Flat slots in proximal and distal endcaps for stabilizer tightening with a wide range of common tools.
- Made in the USA - designed and hand-built by the owners.
AVALON | TRYO CARBON | RECURVE’S | SHORT STABILIZERS
-
Avalon Tyro Carbon Short Rod Stabilizer - 12"Value for Money Carbon Stabilizers- Diameter: 18mm - Short stab. (x1): 12" - Lightweight carbon - Incl. dampnerThe tyro 17 is the newly revamped side stabiliser rods from Avalon. A good quality budget stabiliser which is great for beginners and novice archers alike and includes a damper. Designed to complement the tyro 17 long stabiliser rod. For the archer looking to coordinate their stabiliser colour, Avalon offers the tyro 17 in even more colours. Can be used as a single on compounds and twins on recurve. A good quality budget carbon rod. Available in:
- Side stabiliser lengths: 10" & 12"
- Colours: Grey, Red, Blue, Green, Orange and Purple
Reviews
There are no reviews yet.