SHOP

Quick View

Close

TOPOINT | STARTING 36 | COMPOUND BOW SET

₹42,000.00

NOTE:- AVAILABLE ON SPECIAL ORDER ONLY

Add to wishlist

HOYT | GRAND PRIX F7 CARBON RECURVE’S / LIMB

₹42,000.00

Specifications: HOYT Grand Prix F7 42# medium 66” ILF limbs. Quad carbon core Foam technology. Smooth draw all the way through, an exiting limb to shoot. Good-Fair condition. Usual marks from limb fittings. NOTE: SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS Prices are Negotiable for Regular customers at many Products. Be our regular Customer.

Add to wishlist

Quick View

Close

WIAWIS | S21 | CARBON | COMPLETE STABILIZER SET | RECURVE BOW

₹40,000.00

Wiawis S21 Stabilizer Set

Long Bar

Typical options: 28″, 32″
Designed to improve bow stability and reduce vibration.

Short Bars (Pair)

Typical options: 11″ or 12″ each.
Placed on a V-bar to balance left/right torque.

Extender

Typically 3″ or 5″ in length.
Helps space the main rod and side rods for optimal balance.

V-Bar (Carbon)

Usually a lightweight carbon V-bar included in sets.
Connects side rods to the stabilizer setup at fixed angles.

🛠️ Performance Notes

S21 stabilizers are made from reinforced high-strength carbon/foam construction for better stiffness with reduced vibration.
Designed to integrate the V-bar bolt into the stabilizer cap (reducing weight on the rear side), which shifts the center of gravity forward and improves shot stability.
Many retailers sell rods individually, but complete sets bundle all the stabilizer components listed above.

NOTE: SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS SPECIFIC COLOR & SIZE WOULD BE AVAILABLE ON SPECIAL ORDER Prices are Negotiable for Regular customers at many Products. Be our regular Customer.

Add to wishlist

Quick View

Close

EASTON | ACE ARROW SHAFTS ( ALL SERIES) | ARROWS & ACCESSORIES

₹40,000.00

DESCRIPTION
A/C/E is the arrow that started a revolution that continues to this day

One of the most accurate, advanced target shafts ever produced

Lightweight carbon fiber bonded to a precision 7075 alloy core

Barrel-shaped to maximize stiffness

9-micron polished carbon finish

Guaranteed straightness: ± .0015"

Weight Tolerance: ± 0.5 grains

Components sold separately

Sold by the dozen

Weight: 1250 (5.1 gpi), 1100 (5.1 gpi), 1000 (5.7 gpi), 920 (5.8 gpi), 850 (5.7 gpi), 780 (6.0 gpi), 720 (6.4 gpi), 670 (5.9 gpi), 620 (6.1 gpi), 570 (6.3 gpi), 520 (6.7 gpi), 470 (6.8 gpi), 430 (7.0 gpi), 400 (7.5 gpi), 370 (7.9 gpi)

Point options:

Easton 4MM HL Stainless Steel Break-Off Points (all spines use #1)

Weight: 80-130 grains

Easton 4MM ML Stainless Steel Break-Off Point (all spines use #1 or #2)

Weight: #1 60-80 grains | #2 70-90 grains

NOTE:- SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS Prices are Negotiable for Regular customers at many Products. Be our regular Customer.

Add to wishlist

Quick View

Close

PSE | UPRISING | COMPOUND BOW

₹39,500.00

The PSE UPRISING is an affordable, highly adjustable compound bow. Set your draw length from 14” to 30” and draw weight from 15 to 70 lbs. The UPRISING delivers 310 fps at a great price. SPECIFICATIONS BRACE HEIGHT: 6 ⁵⁄₈” AXLE-TO-AXLE: 30” ATA/IBO SPEED: 310-302 FPS LETOFF: 70% MASS WEIGHT: 3.2 LBS. DRAW LENGTH RANGE: 14” – 30” DRAW WEIGHTS (LBS.): up to 50 OR up to 70 MAX LIMB BOLT TURNS: 13

Prices are Negotiable for Regular customers at many Products. Be our regular Customer.

SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS

Add to wishlist

Quick View

New

Close

SHIBUYA | ULTIMA CPX IV | COMPOUND BOW SIGHT | COMPOUND SIGHT

₹38,500.00

Extremely rigid and lightweight design. The "gold standard" for 3D and target compound sights.

Product Specification Table

Model		ULTIMA CPXⅣ	ULTIMA CPX III	ULTIMA CP PRO G2
Extension bar		400-6: 6-inch carbon extension 400-9: 9-inch carbon extension	400-6: 6-inch carbon extension 400-9: 9-inch carbon extension	400-6: 6-inch polygonal carbon extension 400-9: 9-inch polygonal carbon extension
weight		400-6: 200g 400-9: 220g	400-6: 206g 400-9: 225g	400-6: 240g 400-9: 265g
Aperture Distance (APD)		400-6: Max. 187mm/Min. 99mm 400-9: Max. 264mm/Min. 99mm	400-6: Max. 187mm/Min. 99mm 400-9: Max. 264mm/Min. 99mm	400-6: Max. 191mm/Min. 131mm 400-9: Max. 265mm/Min. 205mm
Elevation	method	Lockdown-less screw drive with jump mechanism	Lockdown-less screw drive with jump mechanism	Lockdown-less screw drive with jump mechanism
	length	100mm (approximately 4 inches)	100mm (approximately 4 inches)	100mm (approximately 4 inches)
	Range of motion	Approximately 73mm	Approximately 73mm	73mm
	Movable step	1 rotation = 1/32 inch (approximately 0.8 mm)	1 rotation = 1/24 inch (approximately 1 mm)	1 rotation = 1/32 inch (approximately 0.8 mm)
	Movable step	1 click = 1/640 inch (approximately 0.04 mm)	1 click = 1/480 inch (approximately 0.05 mm)	1 click = 1/640 inch (approximately 0.04 mm)
	Tilt adjustment	Yes	Yes	Yes
Vintage	Range of motion	Approximately 10mm	Approximately 10mm	14mm (2nd axis offset +9mm/-7mm also available)
	Movable step	1 rotation = 1/32 inch (approximately 0.8 mm)	1 rotation = 1/24 inch (approximately 1 mm)	1 rotation = 1/32 inch (approximately 0.8 mm)
	Movable step	1 click = 1/640 inch (approximately 0.04 mm)	1 click = 1/480 inch (approximately 0.05 mm)	1 click = 1/640 inch (approximately 0.04 mm)
	Supported scopes	Screw size No.10-32	Screw size No.10-32	Screw size No.10-32
	2nd and 3rd axis adjustment	Yes	Yes	Yes
extension	length	400-6: 157mm (approximately 6 inches) 400-9: 233mm (approximately 9 inches)	400-6: 157mm (approximately 6 inches) 400-9: 233mm (approximately 9 inches)	400-6: 157mm (approximately 6 inches) 400-9: 225mm (approximately 9 inches)
	Adjustment Range	400-6: 3.5 inches (approx. 89 mm) 400-9: 6.5 inches (approx. 165 mm)	400-6: 3.5 inches (approx. 89 mm) 400-9: 6.5 inches (approx. 165 mm)	400-6/400-9 common: 2.4 inches (60 mm)
	Adjustment Steps	0.5 inches (approximately 12.7 mm)	0.5 inches (approximately 12.7 mm)	0.47 inches (12 mm)
Main materials	Elevation Department	6000 series aluminum alloy	6000 series aluminum alloy	6000 series aluminum alloy
	Box section	6000 series aluminum alloy	6000 series aluminum alloy	6000 series aluminum alloy
	extension	carbon fiber	carbon fiber	carbon fiber
color		Black, Blue, Red, Gunmetal Silver	Black, Blue, Red, Gunmetal Silver	Black, Blue, Red, Gunmetal Silver
Right/Low		Yes	Yes	Yes
Release date		2025	2022	2025
accessories		Sight soft case No. 10-24 Mount fixing screws Hex wrench 1.5mm/2mm/3mm Sight plate x 1 Sight chart plate x 1 Plank tape Offset bracket	Sight soft case No. 10-24 Mount fixing screws Hex wrench 1.5mm/2mm/3mm Sight plate x 1 Sight chart plate x 1 Plank tape Offset bracket	Sight soft case No. 10-24 Mount fixing screws Hex wrench 1.5mm/2mm/3mm Sight plate x 1 Sight chart plate x 8 Blank tape
accessories		Instruction manual *See the website using the QR code	Instruction manual and warranty card	Instruction manual *See the website using the QR code
Options (sold separately)		Bridge Lock Extension Set	-	Offset Bracket Bridge Lock Extension Set

Note:

1. Special Color, Size 9" & LH Sight Available on Only Special Order

2. Shipping Charges are Extra as per Actual Basis

Add to wishlist

Quick View

Close

ULTRAVIEW | BUTTON COMPOUND | BOW RELEASER( STAINLESS STEEL)

₹38,500.00

Description

ULTRAVIEW UV Button The new UV Button is available in two options, this is the heavier of the two and is built in stainless steel and finished in matte black Cerakote. The heavier handle provides more forgiveness if you activate it with more of a command shot. Simultaneously it is perfect for hunters and target archers alike. Utilizing identical ergonomics as ULTRAVIEW’s premier back-tension release, the Hinge 2, an archer may seamlessly switch between the two and maintain a consistent point of impact. The UV Button also features Ultraglide technology creating a quiet, reliable, ultra-smooth shooting experience. In addition, the release features micro-adjust force and travel, allowing you to custom-tune your release to your exact shooting preferences. The springed D-Loop Retainment easily clips your UV Button to your d-loop, leave it there, making it ready to use. If you’re looking for an ergonomic, easy-to-tune, hunter-friendly button release, the UV Button is a great choice. Features and Technology:

ULTRAGLIDE™ - An all new design for button releases; ULTRAGLIDE™ is an advanced self-lubricating, internal bushing system that isolates all unnecessary metal-on-metal contact. Resulting in an incredibly low maintenance, smooth, reliable, and quiet release.
UV BUTTON™ & HINGE 2 - Have the exact same profile and geometry which was designed to fit the human hand perfectly. This optimizes comfort and consistency when switching releases. As an added bonus, with proper shot execution you may experience the same point of impact with both releases.
Convenient Adjustability - Micro-adjust a wide range of force and travel. The force can be set as feather-light or super-heavy without needing to swap springs.
Springed D-loop retainment - Allows you to keep UV BUTTON™ on your string without falling off, ensuring you’re ready at all times - a must-have for all hunters.
Hunting Bracket 3rd Finger - Inspired by The Hunting Bracket, the third finger has a lanyard loop for people who prefer using a wrist lanyard.
Contoured Knob - The thumb knob has an ergonomic dished contour with non-slip spiral grooves ensuring it fits your thumb perfectly.
Cerakote - Durable Matte Black cerakote finish.
The heavier stainless-steel option is more forgiving, helping reduce misses downrange and archer variations during activation.
Rubber Bumper Silencing System: Provides an ultra-quiet release.

Specifications:

Activation style: Thumb button
Number of fingers: 3
Construction: Stainless Steel
Finish: Cerakote
Adjustable tension: yes
Adjustable travel: yes
Micro-adjustable: yes
Color: Matte Black

Includes: UV Button, allen key for trigger and travel adjustments, instruction manual

Add to wishlist

KINETIC | EVOLIUM | 25″ | RISER | RECURVE BOW

₹38,500.00

KINETIC RISER EVOLIUM 25''

The Evolium by Kinetic sets a new standard in the price to performance category. Featuring a fully CNC machined riser out of 6063-T6 aluminum. Kinetic's Evolium was designed to be extremely rigid while also maintaining the forgiveness Kinetic risers are known for. The Kinetic Evolium uses a unique lattice design that provides stiffness while reducing weight and cross wind movement. The Evolium comes equipped with an ergonomic grip, clicker plate and precisely machined limb pockets with lateral limb adjustments.

Specifications

Weight: 1150g
6063-T6 Aluminum
Machined Extrusion CNC Riser
Ergonomic Wooden Grip
Anodized finish
Clicker extension plate with double screw structure
Compatible with all ILF limbs

NOTE: SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS SPECIFIC COLOR WOULD BE AVAILABLE ON SPECIAL ORDER Prices are Negotiable for Regular customers at many Products. Be our regular Customer

Add to wishlist

Quick View

Close

SHREWD | REV-X | LONG BAR | RECURVE BOW

₹38,500.00

The RevX series stabilizer was designed to be a multi-discipline stabilizer that transcends what previously had been designed for the compound and recurve markets.
Utilizing Shrewd’s proprietary .630” diameter STS carbon the RevX series stabilizers bridge the gap between recurve and compound archers to create a stabilizer system that is just as capable at winning Olympic medals as it is dominating 3D podiums.
STS carbon utilizes an internally tapered carbon composite that maximizes rigidity while minimizing overall stabilizer weight. The internal addition of Shrewd’s signature Truss Dampening System combines with the STS carbon to produce a stabilizer with unrivaled dampening abilities.
Stabilizer length is measured from end cap to end cap and does not include stabilizer weights. Included weight stack adds 1.5" to overall stabilizer length.
.630" Carbon Diameter
1.0" End Cap Diameter
STS Carbon Construction
5/16"-24 Threads
HiLo-S slide-over passive vibration damper
(3) 1 ounce tungsten weights
(3) 1/3 ounce aluminum weights
(1) 1/3 ounce dome decal aluminum weight
(1) 5/16"-24 x 3" threaded rod
Shrewd decal

Add to wishlist

Quick View

Close

MATHEWS | MENACE 2 | COMPOUND BOW

₹38,500.00

The Menace II is an ideal bow for beginning archers that are still growing into the sport. With ultimate adjustability, the Menace II sports a draw length range of 17-30 inches and 15-52 pounds of draw weight adjustment, all without the need of a bow press. Featuring a perimeter-weighted dual cam system, the Menace II is smooth and balanced. With a physical weight of just 2.8 pounds, the Menace II is perfect for shooters that may be smaller in stature. The Menace II is American-made and comes with a Lifetime Warranty. Explore the numerous finish options. Specifications

- IBO Rate N/A
- Physical Weight 2.8 lbs.
- Axle to Axle 31"
- Brace Height 7 1/2"
- Let-off Up to 80%
- Draw Weight 15 - 52 lbs.
- Draw Length 17 - 30"
- Cam(s) Perimeter Weighted Dual Cam
- Bowstrings Zebra® Hybrid
- String Length 55 3/4"
- Grip New, Ergonomic Composite Grip
- Cable Length 33 7/8"

Prices are Negotiable for Regular customers at many Products. Be our regular Customer.

Add to wishlist

Quick View

Close

WNS BY WIN&WIN | SF-LINE SMC 15 | CARBON | STABILIZER SET | RECURVE BOW

₹38,000.00

SMC 15

Highly durable 3k carbon fabric surface

SMC 15 is SF’s revolutionary new stabilizer constructed from modern high tensile strength carbon, making it stronger and stiffer. With its highly durable 3K carbon fabric surface, the SMC stabilizing system has improved dampening qualities, shock absorbance and torque control. Unlike other stabilizers the thickness of the SMC tube wall varies, helping it to absorb high levels of shock very quickly. The rod wall measures 0.0275” (0.7mm) at the front and 0.0787” (2mm) at the base. This creates reduces movement at the end of the rod and absorbing vibration throughout the length of the stabilizer rather than pushing it back into the bow.

Technical Specifications


Long	26, 28, 30, 32 or 34"
Short	10,11,12,14,15"
Extender	3, 4, 5, 6"

COLORS

Technical Specifications


Long	26, 28, 30, 32 or 34"
Short	10,11,12,14,15"
Extender	3, 4, 5, 6"

SMC 15

LONG ROD LENGTH=26, 28, 30, 32 or 34"

SHORT ROD LENGTH=10,11,12,14,15"

EXTENDER LENGTH=3, 4, 5, 6”

COLORS=RED, SILVER
NOTE:SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASISSPECIFIC COLOR WOULD BE AVAILABLE ON SPECIAL ORDER

Add to wishlist