Previous product
Back to products
WIAWIS | ACS-EL | LONG BAR
₹18,500.00
Next product
TOPOINT | X 40 | COMPOUND BOW
₹78,000.00
WIAWIS | ACS-EL | SHORT BAR
₹15,000.00
SHORT BAR LENGHT:
10 inches (74g)
11 inches (77g)
12 inches (80g)
14 inches (84g)
15 inches (86g)
Description:
- Features graphene carbon to improve overall stiffness
- Strong end-caps increase strength in the stabilizer system
- Tapered internal design also improves dampening properties
- Weight system is 1/4″ x 20
- Slim profile decreases wind drag for improved outdoor performance
- Includes:
- 1 Bottom flat weight 45 grams | 1.59 ounces
- 1 Head weight 45 grams | 1.59 ounces
Category: SHORT STABILIZERS
Related products
AVALON | TEC ONE CARBON | RECURVE’S | SHORT STABILIZERS
₹2,500.00
Narrow diameter and stiffness in a great value stabilizer. The Avalon Tec One 18 Xtra-Stiff is constructed from high modulus carbon material and includes a damper and end weights. Available in 10in, 12in, 15in and 32in lengths. 18mm diameter. Black colour with a choice or gold or silver graphics.
- Colour: Black with gold or silver graphics
- Diameter: 18mm
- Lengths: 10in, 12in, 15in
- Material: High Modulus carbon
- Damper and end weights included
- Thread: 5/16IN
CARTEL | MAXION CARBON | LONG BAR | STABILISER SET | RECURVE & COMPOUND BOW
₹3,500.00
This is a good choice for either compound or recurve archers who want a lightweight stabilizer that will kill vibration, at an affordable price. If you decide you want to increase your end weight, the threaded cap accepts add-on weights. • Versatile, mid-range stabilizer at a great value • High modulus full carbon construction • Outside diameter: 17mm • Includes CX500 damper weight for enhanced dampening • Weight: 26" (3.6 oz.), Weight: 28" (3.7 oz.), Weight: 30" (3.9 oz.),
Cartel Maxion Carbon Stabilizer:
The Maxion Carbon is a highly versatile 17mm diameter mid-range carbon stabilizer at an incredibly low price. Constructed from high modulus carbon. It features an integral CX500 damper weight for enhanced dampening properties and is available in black, blue and red colours with a fresh new design.- Lengths:
- 26in
- 28in
- 30in
- Colours:
- Black
- Blue
- Red
- Material: High modulus carbon
- Diameter: 17mm
- Threads: 5/16in base / 1/4in end
- CX500 damper weight included
FUSE | TAPER CARBON | RECURVE’S | SHORT STABILIZERS
₹6,000.00
- From Cartel-Doosung.
- The Maxion Carbon Short Stabilizer is a highly versatile 17mm diameter mid-range carbon stabilizer at great value and price.
- Features integral the CX500 damper with weight for enhanced dampening property.
- Available in Black, Blue and Red.
- Sizes: 10", 12"
- Note: Stabilizer length is carbon rod length excluding the weight.
RAMRODS | BEAST | LONG & SHORT BAR
₹16,500.00 – ₹26,500.00
Description
The Beast is the stabilizer of choice for compound athletes at the top of their game. RamRods athletes Jozef Bosansky world #2, Jyothi Vennam world #4, and many more have been absolutely crushing on the international stage, with podiums at the World Championships and World Cup 1 & 3.
The Beast began with one question, how can we make a stabilizer that is stiff enough to feel great at 50oz+ while also being highly wind efficient and vibration free? After over a year of intense research, design, and testing we are excited to share the answer.
The Beast provides compound athletes with stiffness and weight capacity that will exceed the expectations of even the most demanding shooters. Yet it remains the most wind efficient product on the market at this level of stiffness. This is accomplished through the RamRods Wind Taper which provides more stiffness at the base where the stabilizer experiences the most stress, and slims down at the tip to reduce wind drag in the area of most wind torque.
In addition to best-in-class stiffness and wind efficiency, the Beast destroys vibration and resonance through VIBRO-CORE internal damping (standard on all models) and the option to upgrade to Tungsten damping for next level vibration reduction and improved front of center.
The Beast is ideal for compound athletes using moderate to heavy mass weight. The recommended weight ranges for the front stabilizer are 15-20oz for crisp feel, 21-50oz for ideal feel, 51oz+ for softer feel. This recommended weight range does not account for dampers or decouplers – mass weight that the stabilizer can handle increases when using dampers between weights or between the stabilizer and the weights. Side rods can handle roughly double the mass weight for similar reactions.
If you’re a compound athlete ready to unleash your performance then look no further than the Beast.
Features
-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~51
-Diameter – Long Rod 0.75 in to 0.56 in Taper Side Rod – 0.63 in to 0.56 in taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots and Through-Hole in proximal endcap for stabilizer tightening.
-Made in the USA | designed and hand-built by the owners
-30 in Beast with standard VIBRO-CORE weighs 6.9oz and with Tungsten Damping weighs 9.7oz
RAMRODS | VEKTOR | LONG & SHORT BARS
₹12,500.00 – ₹22,500.00
Description
The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market.
The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56 inch to 0.5 inch taper.
Features
-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~90
-Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots in proximal endcap for tightening with a wide range of common tools.
-Made in the USA | designed and hand-built by the owners
-30″ Vektor with standard VIBRO-CORE weighs 5.6oz and with Tungsten Damping weighs 8.6oz
CARTEL | MAXION CARBON | SHORT BAR | STABILISER SET | RECURVE & COMPOUND BOW
₹2,500.00
This is a good choice for either compound or recurve archers who want a lightweight stabilizer that will kill vibration, at an affordable price. If you decide you want to increase your end weight, the threaded cap accepts add-on weights. • Versatile, mid-range stabilizer at a great value • High modulus full carbon construction • Outside diameter: 17mm • Includes CX500 damper weight for enhanced dampening • Weight: 26" (3.6 oz.), Weight: 28" (3.7 oz.), Weight: 30" (3.9 oz.),
Cartel Maxion Carbon Short Rod:
The Maxion Carbon is a highly versatile 17mm diameter mid-range carbon stabilizer at an incredibly low price. Constructed from high modulus carbon. It features an integral CX500 damper weight for enhanced dampening properties and is available in black, blue and red colours with a fresh new design.- Lengths:
- 10in
- 12in
- Colours:
- Black
- Blue
- Red
- Material: High modulus carbon
- Diameter: 17mm
- Threads: 5/16in base / 1/4in end
- CX500 damper weight included
-
- From Cartel-Doosung.
- The Maxion Carbon Short Stabilizer is a highly versatile 17mm diameter mid-range carbon stabilizer at great value and price.
- Features integral the CX500 damper with weight for enhanced dampening property.
- Available in Black, Blue and Red.
- Sizes: 10", 12"
- Note: Stabilizer length is carbon rod length excluding the weight.
(14183)
WIN&WIN | WIAWIS | HMC PLUS CARBON | RECURVE’S | SHORT STABILIZERS
₹6,600.00
Recurve archers strive for higher arrow speeds, but this results in increased vibration in the bow.
Up until now, stabilisers have not been able to effectively deal with this. Win & Win specifically designed the HMC Plus to address this issue. The system also improves dampening, absorbs shock and helps control torque during shooting.
While other stabilisers have a consistent wall thickness along their length that does not fully absorb vibration, the wall thickness of HMC Plus varies.
At the front of the rod the wall is 0.0275” (0.7mm) thick, gradually growing to 0.0787” (2mm) at the base. When installed with an extender as a full stabilisation system, HMC Plus effectively absorbs the shock produced by shooting a recurve bow.
FEATURES:
- Varying wall thickness for vibration absorption.
- Designed to be shot as a full system with extender
- Length: 10", 11", 12"
- Weight: 141g, 145g, 156g
- Colours: Matte Black, Black, Gold/Black, Blue, Red, White
Reviews
There are no reviews yet.