SKYLON | PREMINENES | CARBON ARROWS | ARROWS
₹19,500.00
Material: 40-TON Carbon
Inner Diameter: 3.2mm / .125″
Straightness Tolerance: ±.001″
Set of 12 Carbon Arrows from Skylon.
These come fletched with Pin Nocks, EP vanes.
Suitable for both recurve and compound bows. However if using with compound let us know so we can add a large groove nock.
Note- Special Order Item, please allow 2-3 weeks for delivery, however during busy periods this may take longer. To avoid disappointment please check stock levels with our suppliers HERE, if the item is out of stock we will refund or discuss alternatives
Skylon Preminens:
Material: 40-ton Carbon
Inner diameter: 3.2mm / 0.125″
Grains per inch: (spine dependent)
Straightness tolerance: ±0.01″
Full length: 32″
Please see diagram for arrow length, if you are unsure please get in touch.
Related products
GRAND ARCHERY BOWMAN | GOLD MEDAL | COMPOUND CARBON | ARROWS | PER DOZ
Gold Medal COMPOUND Arrows
The GAB Gold Medal arrow is an all-carbon shaft with a straightness tolerance of +/- .005in supplied with Rubber vanes and small groove pin nocks installed and break-off points supplied loose. Shafts are not pre-cut. 400-800 sizes are normally supplied with 80-100gr points, 900-1500 sizes supplied with 60-80gr points. Perfect for archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied items may vary. Cutting service not available on this item. Perfect for beginner archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied Components (may vary):- Vanes: - INSTALLED
- Nocks: Pin Nocks with Pins - Either small or large groove depending upon shaft size - INSTALLED
- Points: Break-off - Either 60-80gn or 80-100gn depending upon shaft size - SUPPLIED LOOSE
EASTON | CARBON FULL BORE 350 WITH G UNI-BUSHING 12/PK WITH POINTS | INDOOR ARROWS
ABOUT THE PRODUCT
Tough, reliable, multilayer all-carbon construction for premium performance and long lasting accuracy.
Full Bore Archers turn to Full Bore for the best carbon line cutter available today. Uncompromising tolerances mean shooters can focus on shot execution. Engineered specifically for indoor and 3D performance, Full Bore provides an uncompromising mix of speed, large-diameter design, and unrivaled accuracy resulting in tournament-winning scores.
SPECIFICATIONS
Tough, reliable, multilayer all-carbon construction for premium performance and long lasting accuracy.
NOTE:
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS
Prices are Negotiable for Regular customers at many Products. Be our regular Customer
EASTON X10 | PARALLEL PRO 4MM | ARROW SHAFTS WITH POINTS & PINS | PACK OF DOZEN
ABOUT THE PRODUCT
Experience the World’s Finest Arrow with the X10 4mm Parallel Pro.
Renowned as the arrow of choice for Olympic champions, the X10 sets the standard for precision and quality in archery. The new Parallel Pro carries this legacy forward as a lightweight, easy-tuning 4mm shaft crafted with the highest tolerances and high-modulus carbon fiber. Designed for recurve, compound, target, field, and barebow disciplines, the Parallel Pro delivers unmatched accuracy and performance for serious archers worldwide.
New for Bowhunters: Factory-Fletched Parallel Pro
For the first time, the legendary X10 quality is available in a hunting-specific configuration. The factory-fletched Parallel Pro features AAE Hybrid 26 vanes, Microlite Nocks, and 4mm Match Grade 55-grain Half-outs, combining precision and durability in a lightweight aluminum/carbon A/C hunting shaft. Available in four spines—250, 300, 340, and 380—the Parallel Pro brings X10’s world-class tolerances to bowhunting, giving archers the edge they need in the field.
SPECIFICATIONS
– High-strength carbon fiber bonded to a 7075 alloy core – Straightness: ± .001” – Weight tolerance: ± 0.5 grains in precise weight codes – Components sold separately
EASTON | FMJ MATCH ARROW SHAFTS | ARROWS & ACCESSORIES | ARROWS CARBON & POINTS
-
The 4MM FMJ offers the most penetration and is precision-made in USA for the most accurate hunting arrow on the market!
The 4MM Full Metal Jacket has been updated with a new spine configuration, an all-new 8-32 point outsert system, and a redesigned graphics. The standard 8-32 thread point outsert optimizes front-of-center for easier broadhead tuning and more durability.
FMJ starts with an advanced carbon core foundation for lightweight strength. A full metal jacket adds kinetic energy, enhances accuracy, and pulls easier from targets. The combination provides the deepest penetration and more pass-through impacts for quicker kills and heavier blood trails.
4mm FMJ
SIZE SHAFT WEIGHT GPI SPINE @ 28″ SPAN DEFLECTION IN INCHES STOCK LENGTH INCHES DEEP SIX FIELD POINT 100/125 GRAINS O.D. INCHES 4MM HALFOUT 400 9.8 0.400 31.5 DP6-4 0.234 #2 340 11.0 0.340 32 DP6-5 0.240 #3 300 11.7 0.300 32.5 DP6-6 0.244 #4 250 12.3 0.250 33 DP6-5 0.247 #5 - 4mm Aluminum Point Outsert included (50 grains)
- 4mm Micro- Diameter carbon core with 7075 alloy jacket
- Pre-installed 4mm Nocks
- Easy target Pull
- Straightness +/- .003” (Also available in .001” Match Grade version)
- Made in the USA
NOTE:- SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
EASTON | XX75 CAMO HUNTER | ARROWS | DOZ
SPECIFICATION:-
-
Material: 7075-T9 aluminum alloy
-
Tensile Strength: 96,000 psi
-
Straightness Tolerance: ± 0.002″
-
Weight Tolerance: ± 1% (as per some retailers)
-
Finish: Hard-anodized 4-tone camouflage (also described as “easy-draw finish”)
Inserted Components: Pre-installed UNI bushings and included RPS inserts; nocks installed (Super Nock for most spines, X Nock for 1816 & 1916 models)
Shaft Spine & Dimension Table
Here’s a consolidated overview of the spine options with their specs:
| Model (Spine) | Shaft Weight (GPI) | Deflection @ 28″ (inches) | Stock Length | Nock | Insert Weight |
|---|---|---|---|---|---|
| 1816 | 9.3 | 0.756 | 30″ | X Nock | 12 gr |
| 1916 | 10.0 | 0.623 | 31″ | X Nock | 15 gr |
| 2013 | 9.0 | 0.610 | ~32⅜″ | Super Nock | 21 gr |
| 2016 | 10.6 | 0.531 | 32″ | Super Nock | 23 gr |
| 2018 | 12.3 | 0.464 | ~30⅜″ | Super Nock | 22 gr |
| 2114 | 9.9 | 0.510 | ~31⅛″ | Super Nock | 25 gr |
| 2117 | 12.0 | 0.407 | ~31⅜″ | Super Nock | 29 gr |
| 2213 | 9.8 | 0.458 | ~31⅜″ | Super Nock | 34 gr |
| 2215 | 10.7 | 0.419 | 31½″ | Super Nock | 34 gr |
| 2216 | 12.0 | 0.376 | 31¾″ | Super Nock | 34 gr |
| 2219 | 13.8 | 0.337 | 32″ | Super Nock | 31 gr |
| 2317 | 13.3 | 0.303 | ~32⅛″ | Super Nock | 42 gr |
| 2413 | 10.4 | 0.372 | ~32½″ | Super Nock | 40 gr |
GRAND ARCHERY BOWMAN | GOLD MEDAL | RECURVE CARBON | ARROWS WITH VANES | PER DOZ
Gold Medal Recurve Arrows
The GAB Gold Medal arrow is an all-carbon shaft with a straightness tolerance of +/- .005in supplied with Rubber vanes and small groove pin nocks installed and break-off points supplied loose. Shafts are not pre-cut. 400-800 sizes are normally supplied with 80-100gr points, 900-1500 sizes supplied with 60-80gr points. Perfect for archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied items may vary. Cutting service not available on this item. Perfect for beginner archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied Components (may vary):- Vanes: - INSTALLED
- Nocks: Pin Nocks with Pins - Either small or large groove depending upon shaft size - INSTALLED
- Points: Break-off - Either 60-80gn or 80-100gn depending upon shaft size - SUPPLIED LOOSE
Reviews
There are no reviews yet.