SHIBUYA | ULTIMA OKULUS SCOPE | COMPOUND | SIGHT SCOPE
₹3,500.00
This state-of-the-art compound scope was developed with utmost care for balance, enabling it to fit to any configuration.
The brand new Gravity Shift technology enables the scope to compensate for shifting center of gravity when using the large variety of accessories, such as sun shades and decal rings. OKULUS strikes the balance for a wide array of use cases.
Spec Table
| mass weight | Housing Set | 33.7g (Lens not included) |
|---|---|---|
| Front Sunshade | 11g | |
| Back Sunshade | 8.2g | |
| Decal Ring | 7.2g | |
| Active (inside) diameter | 29mm(27mm when used with front sunshade) | |
| Compatible Sights | Sights with No.10-32 scope thread | |
| Scope Attachmen | Adjustability | Available (GRAVITY SHIFT) |
| Adjustment increments | 2mm | |
| Adjustment Range | 4mm | |
| Sight Light Attachmenth Angles | vertical, 45degrees angled | |
| Lens | Type | Feather Vision Vitri Lens,Verde Plus Lens (sold separately) |
| Lens Diameter | 32mm | |
| Lens Diopter | +.50, +.75, +1.00(+.25, +.37, +.62, +.82 available for special order ) | |
| Material | Housing | 2000 series aluminum, color anodized. Machined anti-reflective grooves. |
| Lens Retainer Ring | ||
| Front Sunshade | ||
| Back Sunshade | ||
| Decal Ring | ||
| Scope Rod | Stainless Steel | |
| Level | Yellow (Red available separately) | |
| Color | Black | |
| Release Date | 2020 | |
| Included Accessories | GRAVITY SHIFT Balance Plate A, B Scope Rod (short, long) No. 10-32 Hex Nut 3/32″ Hex Wrench Dual Color Dot Package Instructions Sheet |
|
| Options | Front Sunshade Back Sunshade Decal Ring Fiber Kit (thicknesses: 0.019″, 0.029″) Scope Level RED |
|
NOTE:
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Related products
SANLIDA | X10 RELEASE POUCH
- Function: Holds a release aid (for compound bows) or finger tab (for recurve bows).
- Convenience: Allows for quick and easy storage of the release or tab when not needed.
SANLIDA | X10 FINGER SLING
- Purpose: A finger sling connects the archer's thumb and forefinger to the bow grip, catching the bow after release to prevent it from dropping. This allows for a relaxed bow hand, which can help reduce bow torque and improve consistency.
- Benefits: Finger slings help support the bow's weight after the shot, provide feedback for controlling the bow's follow-through, and can enhance confidence, especially for beginners
CARTEL | 207 | SIGHT SCOPE | COMPOUND BOW
Specifications Cartel 207 Scope:
- Aluminum housing
- Lens with anti-reflection coating
- 30 mm diameter
- Standard 10/32 thread
- Available magnification: .50 (x4), .75 (x6), 1.0 (x8)
- Suited for both right- and left-handed archers
- Dots are not included
SANLIDA | X10 COMPOUND SHORT BAR
- Function: This "short bar" acts as a side rod in a stabilizer setup, primarily designed to absorb vibration and noise during shooting.
- Material: It is constructed from carbon material, contributing to its lightness and strength.
- Lengths: The short bar is available in 11" 12" and 15" lengths.
- Diameter: It has a diameter of 18mm.
- Benefits: This stabilizer aims to improve shooting accuracy and performance by reducing vibrations and enhancing stability.
FIVICS | LIMBS OR SHOE PROTECTOR | ARCHERY ACCESSORIES
Fivics Limb Protector
- Made from durable silicon rubber in an eye catching design
- Worn on your shoe to protect both it and your limbs tip when nocking your arrow or when bow is at rest
- Stud fastener to easily loop around your shoe lace to hold in place
- Available in three colours to suit your mood or match your kit.
- NOTE:
- SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS Prices are Negotiable for Regular customers at many Products. Be our regular Customer
EASTON | XX75 CAMO HUNTER | ARROWS | DOZ
SPECIFICATION:-
-
Material: 7075-T9 aluminum alloy
-
Tensile Strength: 96,000 psi
-
Straightness Tolerance: ± 0.002″
-
Weight Tolerance: ± 1% (as per some retailers)
-
Finish: Hard-anodized 4-tone camouflage (also described as “easy-draw finish”)
-
Inserted Components: Pre-installed UNI bushings and included RPS inserts; nocks installed (Super Nock for most spines, X Nock for 1816 & 1916 models)
Shaft Spine & Dimension Table
Here’s a consolidated overview of the spine options with their specs:
Model (Spine) Shaft Weight (GPI) Deflection @ 28″ (inches) Stock Length Nock Insert Weight 1816 9.3 0.756 30″ X Nock 12 gr 1916 10.0 0.623 31″ X Nock 15 gr 2013 9.0 0.610 ~32⅜″ Super Nock 21 gr 2016 10.6 0.531 32″ Super Nock 23 gr 2018 12.3 0.464 ~30⅜″ Super Nock 22 gr 2114 9.9 0.510 ~31⅛″ Super Nock 25 gr 2117 12.0 0.407 ~31⅜″ Super Nock 29 gr 2213 9.8 0.458 ~31⅜″ Super Nock 34 gr 2215 10.7 0.419 31½″ Super Nock 34 gr 2216 12.0 0.376 31¾″ Super Nock 34 gr 2219 13.8 0.337 32″ Super Nock 31 gr 2317 13.3 0.303 ~32⅛″ Super Nock 42 gr 2413 10.4 0.372 ~32½″ Super Nock 40 gr -
Freight Charges are Extra as per actual basis.
-
SANLIDA | X8 RELEASE POUCH
- Secure Storage: This pouch is designed to keep your release aid and other small accessories safe during practice or hunting trips.
- Drawstring Closure: It features a drawstring closure for quick and easy access to your release aid, yet keeps the contents secured within the pouch.
- Padded Interior: The interior of the pouch is padded, providing an extra layer of protection against scratches and impacts.
- Belt Loop Attachment: The pouch can be conveniently attached to your quiver belt for easy access to your release aid at your preferred hip placement

Reviews
There are no reviews yet.