SIZE | 12", 30" |
---|
RAMRODS | VEKTOR | LONG & SHORT BARS
₹12,500.00 – ₹22,500.00
Description
The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market.
The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56 inch to 0.5 inch taper.
Features
-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~90
-Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots in proximal endcap for tightening with a wide range of common tools.
-Made in the USA | designed and hand-built by the owners
-30″ Vektor with standard VIBRO-CORE weighs 5.6oz and with Tungsten Damping weighs 8.6oz
Related products
FIVICS | FORNIX 14 | SHORT BAR | FOR RECURVE STABILIZER SET
DESCRIPTION
- Diameter: 14.55mm
- 4mm thick
- High-elastic, 40ton carbon fiber
- Vibration is dampened through unique carbon material only found in Fivics products
- Weight: 108g (12”)
- DC1500s Damper and 78g Weight Stack Included
- Each Sold Separately

AVALON | TEC ONE CARBON | RECURVE’S | SHORT STABILIZERS
- Colour: Black with gold or silver graphics
- Diameter: 18mm
- Lengths: 10in, 12in, 15in
- Material: High Modulus carbon
- Damper and end weights included
- Thread: 5/16IN
Sanlida X10 | Recurve Stabilizer Side Rod RC BAR | STABILIZER SET
*Full carbon materail stabilizer *Absorb vibration very well *More length and color for your option
- Length:11” 12”
- Material:Carbon
- Diameter:18mm
SHREWD | ONXY CARBON | RECURVE’S | SHORT STABILIZERS
-
DESCRIPTION
- .706" OD premiere modulus matte carbon
- Proprietary internal Truss Dampening Technology stretches the length of the stabilizer to perfectly balance the shot
- Strengthened matte external end caps
- Internal aluminum reinforced end cap allows shooters to use more weight than ever before
- 5/16"-24 stainless steel threaded bolt
- Internal 3" threaded rod allows for up to nine weights
- Comes standard with (3) 1 oz. stainless steel end weights & (3) 1/3 oz. aluminum matte black weights
- (1) 1/3 ounce weight includes a Shrewd domed decal
RAMRODS | BEAST | LONG & SHORT BAR
Description
Features
DECUT | CROWN SHORT ROD | RECURVE’S | SHORT STABILIZERS
Description
- One 30” Long Rod
- Two 10” Side Rods
- One 4” Extension
- One V-Bar Mount
CARTEL | MAXION CARBON | LONG BAR | STABILISER SET | RECURVE & COMPOUND BOW
This is a good choice for either compound or recurve archers who want a lightweight stabilizer that will kill vibration, at an affordable price. If you decide you want to increase your end weight, the threaded cap accepts add-on weights. • Versatile, mid-range stabilizer at a great value • High modulus full carbon construction • Outside diameter: 17mm • Includes CX500 damper weight for enhanced dampening • Weight: 26" (3.6 oz.), Weight: 28" (3.7 oz.), Weight: 30" (3.9 oz.),
Cartel Maxion Carbon Stabilizer:
The Maxion Carbon is a highly versatile 17mm diameter mid-range carbon stabilizer at an incredibly low price. Constructed from high modulus carbon. It features an integral CX500 damper weight for enhanced dampening properties and is available in black, blue and red colours with a fresh new design.- Lengths:
- 26in
- 28in
- 30in
- Colours:
- Black
- Blue
- Red
- Material: High modulus carbon
- Diameter: 17mm
- Threads: 5/16in base / 1/4in end
- CX500 damper weight included
WIAWIS | ACS-EL | SHORT BAR
SHORT BAR LENGHT:
10 inches (74g) 11 inches (77g) 12 inches (80g) 14 inches (84g) 15 inches (86g)Description:
- Features graphene carbon to improve overall stiffness
- Strong end-caps increase strength in the stabilizer system
- Tapered internal design also improves dampening properties
- Weight system is 1/4" x 20
- Slim profile decreases wind drag for improved outdoor performance
- Includes:
- 1 Bottom flat weight 45 grams | 1.59 ounces
- 1 Head weight 45 grams | 1.59 ounces
Reviews
There are no reviews yet.