RAMRODS K2 V2.1 STABILIZER- SHORTS
₹16,000.00
Ramrods K2 V2 Stabiliser Series – A Small Diameter Competition Stabiliser Based On The Original, Very Popular, K2 Design. Ramrods Has Updated The Graphics And Endcaps, Added Internal Damping, And Optimized Its Stiffness And Shot Response Based On Archers’ Feedback.
Standard features of the Ultra:
- Adaptive Weight System – allows for either 1/4-20 or 5/16-24 thread sizes by swapping out the adapter screw.
- VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
- Diameter – 0.5625″
- 5/16-24 threads on both proximal and distal endcap.
- Aluminum proximal and distal endcaps.
- Flat slots in proximal and distal endcaps for stabilizer tightening with a wide range of common tools.
- Made in the USA – designed and hand-built by the owners.
Related products
AAE | STREET HOT RODZ CARBON | RECURVE’S | SHORT STABILIZERS
It is constructed from a proprietary blend of ultra-stiff high modulus carbon, making it the stiffest and most forgiving of any bar available.
DESCRIPTION
• Street Rodz was specifically designed to allow archers to maximize their stabilization potential while remaining on a budget
• Street Rodz features hi-modules carbon with the fit and finish AAE customers have come to expect
• The perfect stabilizer for youth and beginning archers
• Weights sold separately
• 24" (4.9 oz.), 27" (5.1 oz.), 30" (5.5 oz.)
Freight Charges are Extra as per actual basis
DECUT | CROWN SHORT ROD | RECURVE’S | SHORT STABILIZERS
Description
Complete stabilizer setup kit from Decut Archery. Designed to provide a solid stabilizer system for introductory/intermediate archers.
Construction: Carbon Fiber and Aluminum
Kit Includes:
- One 30” Long Rod
- Two 10” Side Rods
- One 4” Extension
- One V-Bar Mount
RAMRODS | VEKTOR | LONG & SHORT BARS
Description
The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market.
The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56 inch to 0.5 inch taper.
Features
-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~90
-Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots in proximal endcap for tightening with a wide range of common tools.
-Made in the USA | designed and hand-built by the owners
-30″ Vektor with standard VIBRO-CORE weighs 5.6oz and with Tungsten Damping weighs 8.6oz
WIN&WIN | WIAWIS | HMC PLUS CARBON | RECURVE’S | SHORT STABILIZERS
Recurve archers strive for higher arrow speeds, but this results in increased vibration in the bow.
Up until now, stabilisers have not been able to effectively deal with this. Win & Win specifically designed the HMC Plus to address this issue. The system also improves dampening, absorbs shock and helps control torque during shooting.
While other stabilisers have a consistent wall thickness along their length that does not fully absorb vibration, the wall thickness of HMC Plus varies.
At the front of the rod the wall is 0.0275” (0.7mm) thick, gradually growing to 0.0787” (2mm) at the base. When installed with an extender as a full stabilisation system, HMC Plus effectively absorbs the shock produced by shooting a recurve bow.
FEATURES:
- Varying wall thickness for vibration absorption.
- Designed to be shot as a full system with extender
- Length: 10", 11", 12"
- Weight: 141g, 145g, 156g
- Colours: Matte Black, Black, Gold/Black, Blue, Red, White
AVALON | TEC X CARBON | RECURVE’S | SHORT STABILIZERS
-
The tec X Olympic 22mm stabiliser from Avalon. Made of high modulus carbon, combining a stiff action with very good damping qualities. Available in:
- Front stabiliser lengths: 28", 30" and 32"
- Side stabiliser lengths: 10", 12" and 15"
FIVICS |SKADI-BX |SHORT STABILIZER
- Manufactured with an advanced blow method that enhances the strength of the carbon shaft and allows for more energy to be absorbed
- Crosswind Zero design enables stable aiming even in unpredictable winds
- The end of the carbon stabilizer tapers to a 17mm diameter without adding a metal cap.
- Center diameter of 13.5mm
- Super Graphite prepreg carbon
- Weight: 98g (12”)
- DC1500s Damper and 78g Weight Stack Included
- Each Sold Separately
AVALON | TEC ONE CARBON | RECURVE’S | SHORT STABILIZERS
Narrow diameter and stiffness in a great value stabilizer. The Avalon Tec One 18 Xtra-Stiff is constructed from high modulus carbon material and includes a damper and end weights. Available in 10in, 12in, 15in and 32in lengths. 18mm diameter. Black colour with a choice or gold or silver graphics.
- Colour: Black with gold or silver graphics
- Diameter: 18mm
- Lengths: 10in, 12in, 15in
- Material: High Modulus carbon
- Damper and end weights included
- Thread: 5/16IN
Reviews
There are no reviews yet.