BOHNING | COOL FERR L TITE | POINT GLUE | ARROWS & ACCESORIOS | FLETCH TAPE & GLUE
₹600.00
-
Description
• Low-temp hot melt for carbon shafts
• Instant full strength set-up in cold water
• Easy to apply, heat reversible
• 12 gram stick will do approximately 144 inserts
NOTE:-
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Out of stock
Related products
EASTON | ACE ARROW SHAFTS ( ALL SERIES) | ARROWS & ACCESSORIES
-
DESCRIPTION
- A/C/E is the arrow that started a revolution that continues to this day
- One of the most accurate, advanced target shafts ever produced
- Lightweight carbon fiber bonded to a precision 7075 alloy core
- Barrel-shaped to maximize stiffness
- 9-micron polished carbon finish
- Guaranteed straightness: ± .0015"
- Weight Tolerance: ± 0.5 grains
- Components sold separately
- Sold by the dozen
- Weight: 1250 (5.1 gpi), 1100 (5.1 gpi), 1000 (5.7 gpi), 920 (5.8 gpi), 850 (5.7 gpi), 780 (6.0 gpi), 720 (6.4 gpi), 670 (5.9 gpi), 620 (6.1 gpi), 570 (6.3 gpi), 520 (6.7 gpi), 470 (6.8 gpi), 430 (7.0 gpi), 400 (7.5 gpi), 370 (7.9 gpi)
- Easton 4MM HL Stainless Steel Break-Off Points (all spines use #1)
- Weight: 80-130 grains
- Easton 4MM ML Stainless Steel Break-Off Point (all spines use #1 or #2)
- Weight: #1 60-80 grains | #2 70-90 grains
SKYLON | BRIXXON | CARBON | 4.2MM | ARROWS | PER DOZ
Specifications
Material: 24-TON Carbon Inner Diameter: 4.2mm / .166" Straightness Tolerance: ±.0015" NOTE: SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS Prices are Negotiable for Regular customers at many Products. Be our regular Customer.EASTON | XX75 CAMO HUNTER | ARROWS | DOZ
SPECIFICATION:-
-
Material: 7075-T9 aluminum alloy
-
Tensile Strength: 96,000 psi
-
Straightness Tolerance: ± 0.002″
-
Weight Tolerance: ± 1% (as per some retailers)
-
Finish: Hard-anodized 4-tone camouflage (also described as “easy-draw finish”)
Inserted Components: Pre-installed UNI bushings and included RPS inserts; nocks installed (Super Nock for most spines, X Nock for 1816 & 1916 models)
Shaft Spine & Dimension Table
Here’s a consolidated overview of the spine options with their specs:
| Model (Spine) | Shaft Weight (GPI) | Deflection @ 28″ (inches) | Stock Length | Nock | Insert Weight |
|---|---|---|---|---|---|
| 1816 | 9.3 | 0.756 | 30″ | X Nock | 12 gr |
| 1916 | 10.0 | 0.623 | 31″ | X Nock | 15 gr |
| 2013 | 9.0 | 0.610 | ~32⅜″ | Super Nock | 21 gr |
| 2016 | 10.6 | 0.531 | 32″ | Super Nock | 23 gr |
| 2018 | 12.3 | 0.464 | ~30⅜″ | Super Nock | 22 gr |
| 2114 | 9.9 | 0.510 | ~31⅛″ | Super Nock | 25 gr |
| 2117 | 12.0 | 0.407 | ~31⅜″ | Super Nock | 29 gr |
| 2213 | 9.8 | 0.458 | ~31⅜″ | Super Nock | 34 gr |
| 2215 | 10.7 | 0.419 | 31½″ | Super Nock | 34 gr |
| 2216 | 12.0 | 0.376 | 31¾″ | Super Nock | 34 gr |
| 2219 | 13.8 | 0.337 | 32″ | Super Nock | 31 gr |
| 2317 | 13.3 | 0.303 | ~32⅛″ | Super Nock | 42 gr |
| 2413 | 10.4 | 0.372 | ~32½″ | Super Nock | 40 gr |
GRAND ARCHERY BOWMAN | GOLD MEDAL | RECURVE CARBON | ARROWS WITH VANES | PER DOZ
Gold Medal Recurve Arrows
The GAB Gold Medal arrow is an all-carbon shaft with a straightness tolerance of +/- .005in supplied with Rubber vanes and small groove pin nocks installed and break-off points supplied loose. Shafts are not pre-cut. 400-800 sizes are normally supplied with 80-100gr points, 900-1500 sizes supplied with 60-80gr points. Perfect for archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied items may vary. Cutting service not available on this item. Perfect for beginner archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied Components (may vary):- Vanes: - INSTALLED
- Nocks: Pin Nocks with Pins - Either small or large groove depending upon shaft size - INSTALLED
- Points: Break-off - Either 60-80gn or 80-100gn depending upon shaft size - SUPPLIED LOOSE
AVALON | CLASSIC CARBON ARROWS COMPLETE | ARROWS CARBON & POINTS
AVALON CLASSIC CARBON ARROWS
Specifications
- Material: 100% Carbon Fiber
- Straightness: ±0.006"
- Weight Tolerance: ±2 Grains
- Durable Carbon Construction
- Precision Spine Selection
- High Visibility Vanes
- Suitable for Recurve & Compound Bows
- Available in Multiple Spine Sizes
- Lightweight & Fast Performance
- Ideal for Training and Competition
Key Features
✔ Consistent Accuracy
✔ Smooth Flight Performance
✔ Strong Impact Resistance
✔ Easy Arrow Tuning
✔ Excellent Value for Archers
GRAND ARCHERY BOWMAN | GOLD MEDAL | COMPOUND CARBON | ARROWS | PER DOZ
Gold Medal COMPOUND Arrows
The GAB Gold Medal arrow is an all-carbon shaft with a straightness tolerance of +/- .005in supplied with Rubber vanes and small groove pin nocks installed and break-off points supplied loose. Shafts are not pre-cut. 400-800 sizes are normally supplied with 80-100gr points, 900-1500 sizes supplied with 60-80gr points. Perfect for archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied items may vary. Cutting service not available on this item. Perfect for beginner archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied Components (may vary):- Vanes: - INSTALLED
- Nocks: Pin Nocks with Pins - Either small or large groove depending upon shaft size - INSTALLED
- Points: Break-off - Either 60-80gn or 80-100gn depending upon shaft size - SUPPLIED LOOSE

Reviews
There are no reviews yet.