| QTY IN PACK | 1 pc, 25 pcs |
|---|
BEITER | PIN NOCK #2 HUNTER | ARROWS & ACCESSORIES |
₹110.00 – ₹2,500.00
Pin Nock #2 Hunter
Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
- Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.
The Beiter Pin-Nock is available in the Beiter patented ASYMMETRIC version, as well as in the SYMMETRIC version, for Compound archers using a D-Loop. Pay attention that the Beiter Logo should face on top of the nock while shooting!
Additional information
Related products
EASTON | X10 ARROW SHAFTS WITH POINTS (ALL SERIES) | ARROWS & ACCESORIOS | ARROWS CARBON & POINTS
SPECIFICATIONS
- High-strength carbon fiber bonded to a 7075 precision alloy core
- Polished 9-micron carbon finish
- Straightness: ± .001”
- Weight tolerance: ± 0.5 grains per packaged dozen
- Weight coded for precision matching between dozens
- Components—sold separately
- Barreled design
- Used to win every Olympic title since 1996
- MADE IN USA
- *6 pack boxes come in 32″ stock length only
GRAND ARCHERY BOWMAN | GOLD MEDAL | RECURVE CARBON | ARROWS | PER DOZ
Gold Medal Recurve Arrows
The GAB Gold Medal arrow is an all-carbon shaft with a straightness tolerance of +/- .005in supplied with Rubber vanes and small groove pin nocks installed and break-off points supplied loose. Shafts are not pre-cut. 400-800 sizes are normally supplied with 80-100gr points, 900-1500 sizes supplied with 60-80gr points. Perfect for archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied items may vary. Cutting service not available on this item. Perfect for beginner archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied Components (may vary):- Vanes: - INSTALLED
- Nocks: Pin Nocks with Pins - Either small or large groove depending upon shaft size - INSTALLED
- Points: Break-off - Either 60-80gn or 80-100gn depending upon shaft size - SUPPLIED LOOSE
Note : Shipping Charges are extra As per Actual Basis
EASTON | ACG ARROW SHAFTS (ALL SERIES) | ARROWS & ACCESSORIES | ARROWS CARBON & POINTS
-
Description
- A/C/E is the arrow that started a revolution that continues to this day
- One of the most accurate, advanced target shafts ever produced
- Lightweight carbon fiber bonded to a precision 7075 alloy core
- Barrel-shaped to maximize stiffness
- 9-micron polished carbon finish
- Guaranteed straightness: ± .0015"
- Weight Tolerance: ± 0.5 grains
- Components sold separately
- Sold by the dozen
- Weight: 1250 (5.1 gpi), 1100 (5.1 gpi), 1000 (5.7 gpi), 920 (5.8 gpi), 850 (5.7 gpi), 780 (6.0 gpi), 720 (6.4 gpi), 670 (5.9 gpi), 620 (6.1 gpi), 570 (6.3 gpi), 520 (6.7 gpi), 470 (6.8 gpi), 430 (7.0 gpi), 400 (7.5 gpi), 370 (7.9 gpi)
- Easton 4MM HL Stainless Steel Break-Off Points (all spines use #1)
- Weight: 80-130 grains
- Easton 4MM ML Stainless Steel Break-Off Point (all spines use #1 or #2)
- Weight: #1 60-80 grains | #2 70-90 grains
EASTON | X10 PROTOUR ARROW SHAFTS WITH POINTS (ALL SERIES) | ARROWS & ACCESORIOS | ARROWS CARBON & POINTS
Description
The Easton X10 Pro Tour Shaft is a competition-grade arrow built especially for compound bow shooters. The shaft is one diameter from the nock end to near the middle, and then it tapers down toward the point. This allows the arrow to have a small, wind-cutting front diameter, while maintaining a stiff spine to handle high compound draw weights.
• Since it's introduction the compound specific X10 ProTour has won more titles and set more records than all other choices
• Small outside diameter with a heavier mass weight reduces wind drift and increases accuracy
• High strength carbon fiber bonded to a 7075 alloy core
• Reverse taper design to deal with the force imparted by compound bows
• 9-micron polished carbon finish
• Guaranteed straightness: ± .0015"
• Weight Tolerance: ± 0.5 grains
• Components sold separately
• Sold by the dozen
770 (6.0 gpi), 720 (6.2 gpi), 670 (6.5 gpi), 620 (6.7 gpi), 570 (6.9 gpi), 520 (7.3 gpi), 470 (7.6 gpi), 420 (8.0 gpi), 380 (8.4 gpi)
EASTON | FMJ MATCH ARROW SHAFTS | ARROWS & ACCESSORIES | ARROWS CARBON & POINTS
-
The 4MM FMJ offers the most penetration and is precision-made in USA for the most accurate hunting arrow on the market!
The 4MM Full Metal Jacket has been updated with a new spine configuration, an all-new 8-32 point outsert system, and a redesigned graphics. The standard 8-32 thread point outsert optimizes front-of-center for easier broadhead tuning and more durability.
FMJ starts with an advanced carbon core foundation for lightweight strength. A full metal jacket adds kinetic energy, enhances accuracy, and pulls easier from targets. The combination provides the deepest penetration and more pass-through impacts for quicker kills and heavier blood trails.
4mm FMJ
SIZE SHAFT WEIGHT GPI SPINE @ 28″ SPAN DEFLECTION IN INCHES STOCK LENGTH INCHES DEEP SIX FIELD POINT 100/125 GRAINS O.D. INCHES 4MM HALFOUT 400 9.8 0.400 31.5 DP6-4 0.234 #2 340 11.0 0.340 32 DP6-5 0.240 #3 300 11.7 0.300 32.5 DP6-6 0.244 #4 250 12.3 0.250 33 DP6-5 0.247 #5 - 4mm Aluminum Point Outsert included (50 grains)
- 4mm Micro- Diameter carbon core with 7075 alloy jacket
- Pre-installed 4mm Nocks
- Easy target Pull
- Straightness +/- .003” (Also available in .001” Match Grade version)
- Made in the USA
-Podium Archery can custom cut your arrow shafts for you. Please refer to the custom arrow builder to request a length.
EASTON X10 | PARALLEL PRO | ARROW SHAFTS ONLY | PACK OF DOZEN
ABOUT THE PRODUCT
Experience the World’s Finest Arrow with the X10 4mm Parallel Pro.
Renowned as the arrow of choice for Olympic champions, the X10 sets the standard for precision and quality in archery. The new Parallel Pro carries this legacy forward as a lightweight, easy-tuning 4mm shaft crafted with the highest tolerances and high-modulus carbon fiber. Designed for recurve, compound, target, field, and barebow disciplines, the Parallel Pro delivers unmatched accuracy and performance for serious archers worldwide.
New for Bowhunters: Factory-Fletched Parallel Pro
For the first time, the legendary X10 quality is available in a hunting-specific configuration. The factory-fletched Parallel Pro features AAE Hybrid 26 vanes, Microlite Nocks, and 4mm Match Grade 55-grain Half-outs, combining precision and durability in a lightweight aluminum/carbon A/C hunting shaft. Available in four spines—250, 300, 340, and 380—the Parallel Pro brings X10’s world-class tolerances to bowhunting, giving archers the edge they need in the field.
SPECIFICATIONS
– High-strength carbon fiber bonded to a 7075 alloy core – Straightness: ± .001” – Weight tolerance: ± 0.5 grains in precise weight codes – Components sold separately
https://youtu.be/AnmWAaQK2l4
GRAND ARCHERY BOWMAN | GOLD MEDAL ARROW POINT | ARROWS ACCESORIOS
GRAND BOWMAN ARCHERY brand known for its high-quality archery equipment, including arrow points designed for precision and durability. Their arrow points are typically constructed from stainless steel, offering excellent strength and resistance to corrosion. These points are compatible with various arrow shafts, particularly those with specific inner diameters.
Specifications:
Material: High-strength stainless steel for enhanced durability and performance.
Compatibility: Designed for use with arrow shafts featuring a 0.246" (6.2 mm) inner diameter.
OnPoint Hunts
Weight Options: Available in various weights, including 35 grains (aluminum), 80 grains, and 100 grains, allowing archers to customize their setup based on shooting requirements.
TenRing Archery
Design: Glue-in points equipped to utilize Gold Tip's FACT (Forward Adjustable Component Technology) weight system, providing flexibility in weight distribution and balance.
OnPoint Hunts
Quantity: Sold in packs of 12, ensuring sufficient supply for multiple arrows.
Additional Details:
Dimensions:
80-grain Points: 4.2 mm inner diameter.
100-grain Points: 4.2 mm inner diameter.
These specifications ensure a precise fit and optimal performance when used with compatible Gold Tip arrow shafts. It's essential to verify the inner diameter of your arrow shafts before selecting these points to ensure compatibility. OnPoint Hunts
Reviews
There are no reviews yet.