SIZE | 12", 30" |
---|
RAMRODS | VEKTOR | LONG & SHORT BARS
₹20,500.00
Description
The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market.
The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56 inch to 0.5 inch taper.
Features
-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~90
-Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots in proximal endcap for tightening with a wide range of common tools.
-Made in the USA | designed and hand-built by the owners
-30″ Vektor with standard VIBRO-CORE weighs 5.6oz and with Tungsten Damping weighs 8.6oz
Related products
AVALON | TEC X CARBON | RECURVE’S | SHORT STABILIZERS
-
The tec X Olympic 22mm stabiliser from Avalon. Made of high modulus carbon, combining a stiff action with very good damping qualities. Available in:
- Front stabiliser lengths: 28", 30" and 32"
- Side stabiliser lengths: 10", 12" and 15"
AAE | STREET HOT RODZ CARBON | RECURVE’S | SHORT STABILIZERS
DESCRIPTION
Freight Charges are Extra as per actual basis
WIAWIS | ACS-EL | SHORT BAR
SHORT BAR LENGHT:
10 inches (74g) 11 inches (77g) 12 inches (80g) 14 inches (84g) 15 inches (86g)Description:
- Features graphene carbon to improve overall stiffness
- Strong end-caps increase strength in the stabilizer system
- Tapered internal design also improves dampening properties
- Weight system is 1/4" x 20
- Slim profile decreases wind drag for improved outdoor performance
- Includes:
- 1 Bottom flat weight 45 grams | 1.59 ounces
- 1 Head weight 45 grams | 1.59 ounces
SHREWD | ONXY CARBON | RECURVE’S | SHORT STABILIZERS
-
DESCRIPTION
- .706" OD premiere modulus matte carbon
- Proprietary internal Truss Dampening Technology stretches the length of the stabilizer to perfectly balance the shot
- Strengthened matte external end caps
- Internal aluminum reinforced end cap allows shooters to use more weight than ever before
- 5/16"-24 stainless steel threaded bolt
- Internal 3" threaded rod allows for up to nine weights
- Comes standard with (3) 1 oz. stainless steel end weights & (3) 1/3 oz. aluminum matte black weights
- (1) 1/3 ounce weight includes a Shrewd domed decal
SHREWD | REV-X | SHORT BAR | RECURVE BOW
FEATUERS
- The RevX series stabilizer was designed to be a multi-discipline stabilizer that transcends what previously had been designed for the compound and recurve markets.
- Utilizing Shrewd’s proprietary .630” diameter STS carbon the RevX series stabilizers bridge the gap between recurve and compound archers to create a stabilizer system that is just as capable at winning Olympic medals as it is dominating 3D podiums.
- STS carbon utilizes an internally tapered carbon composite that maximizes rigidity while minimizing overall stabilizer weight. The internal addition of Shrewd’s signature Truss Dampening System combines with the STS carbon to produce a stabilizer with unrivaled dampening abilities.
- Stabilizer length is measured from end cap to end cap and does not include stabilizer weights. Included weight stack adds 1.5" to overall stabilizer length.
EPIC ARCHERY | STONIC PLUS | CARBON SHORT BAR | RECURVE STABILISER SET | RECURVE BOW
Epic Stonic Plus Short Rod
The Epic Stonic Plus (2021) is an upgraded version of the Stonic Plus stabilizer with a new applied vibration suppression technology for enhancing the performance. Added weights and damper for maximizing dampening effects. This model is produced from a premium carbon shaft. 17mm diameter. Available in a selection of matt colours. Made in Korea.- Material: Premium Carbon shaft
- Colours: Matt Black, Matt Blue, Matt Red
- Diameter: 17mm
- Lengths: 10in, 12in
- Weights and damper included
- Threads: 5/16in (V bar end), 1/4in (weight end)
- Made in Korea
FUSE | CARBON BLADE | RECURVE’S | SHORT STABILIZERS
- Brand: Fuse
- Product Name: Carbon Blade
- Bow Type: Recurve
- Functionality: Short stabilizer for vibration reduction and balance
- Material: Carbon construction for lightweight and durability
- Design: Sleek and aerodynamic
- Compatibility: Suitable for recurve bows
Reviews
There are no reviews yet.