| SIZE | 1000, 450, 500, 600, 700, 800, 900 |
|---|---|
| MODEL | TARGET ELITE-V1, TARGET GAMER-V3, TARGET SPORT-V6 |
VICTORY ARCHERY | VAP | SHAFTS WITH NOCKS AND POINT | DOZ | ARROWS
₹20,500.00
The VAP™ Micro-Diameter target arrow not only parallels the precision straightness tolerances of the industry’s very best… it also maintains its +/-.001” straightness shot after shot. Offering the competitive shooter exceptional speed and accuracy with little worry of wind drift, it’s almost an unfair advantage.
MICRO DIAMETER ARROW – 100% carbon fiber construction for maximum speed and accuracy with less wind deflection
EVERY ARROW DIGITALLY SPINE ALIGNED FOR INCREASED ACCURACY AND SHOT TO SHOT CONSISTENCY
EACH DOZEN WEIGHT MATCHED TO +-0.5 GRAINS FOR PRECISE SHOT CONSISTENCY AND TIGHTER GROUPING
ADVANCED NANO CERAMIC ARROW COATING IMPROVES PENETRATION AND ALLOWS FOR EASY REMOVAL FROM TARGETS
Additional information
Related products
EASTON | FMJ MATCH ARROW SHAFTS | ARROWS & ACCESSORIES | ARROWS CARBON & POINTS
-
The 4MM FMJ offers the most penetration and is precision-made in USA for the most accurate hunting arrow on the market!
The 4MM Full Metal Jacket has been updated with a new spine configuration, an all-new 8-32 point outsert system, and a redesigned graphics. The standard 8-32 thread point outsert optimizes front-of-center for easier broadhead tuning and more durability.
FMJ starts with an advanced carbon core foundation for lightweight strength. A full metal jacket adds kinetic energy, enhances accuracy, and pulls easier from targets. The combination provides the deepest penetration and more pass-through impacts for quicker kills and heavier blood trails.
4mm FMJ
SIZE SHAFT WEIGHT GPI SPINE @ 28″ SPAN DEFLECTION IN INCHES STOCK LENGTH INCHES DEEP SIX FIELD POINT 100/125 GRAINS O.D. INCHES 4MM HALFOUT 400 9.8 0.400 31.5 DP6-4 0.234 #2 340 11.0 0.340 32 DP6-5 0.240 #3 300 11.7 0.300 32.5 DP6-6 0.244 #4 250 12.3 0.250 33 DP6-5 0.247 #5 - 4mm Aluminum Point Outsert included (50 grains)
- 4mm Micro- Diameter carbon core with 7075 alloy jacket
- Pre-installed 4mm Nocks
- Easy target Pull
- Straightness +/- .003” (Also available in .001” Match Grade version)
- Made in the USA
-Podium Archery can custom cut your arrow shafts for you. Please refer to the custom arrow builder to request a length.
EASTON | INSPIRE CARBON ARROWS COMPLETE | ARROWS & ACCESSORIES | ARROWS CARBON & POINTS
- Brand: Easton
- Model: Inspire carbon arrows
- Material: Carbon construction
- Complete Set: Arrows come fully assembled with points included
- Application: Designed for target shooting and beginner archers
- Spine: Available in various spine options to match different bow setups
- Length: Standard arrow lengths typically range from 28 to 32 inches
- Diameter: Typically available in standard diameters suitable for various bows
- Fletching: Equipped with vanes or feathers for stability during flight
- Nock: Includes nock at the back end to interface with the bowstring
- Accessories: May include additional components such as arrow wraps or inserts
- Packaging: Sold in packs containing multiple arrows
EASTON | ACG ARROW SHAFTS (ALL SERIES) | ARROWS & ACCESSORIES | ARROWS CARBON & POINTS
-
Description
- A/C/E is the arrow that started a revolution that continues to this day
- One of the most accurate, advanced target shafts ever produced
- Lightweight carbon fiber bonded to a precision 7075 alloy core
- Barrel-shaped to maximize stiffness
- 9-micron polished carbon finish
- Guaranteed straightness: ± .0015"
- Weight Tolerance: ± 0.5 grains
- Components sold separately
- Sold by the dozen
- Weight: 1250 (5.1 gpi), 1100 (5.1 gpi), 1000 (5.7 gpi), 920 (5.8 gpi), 850 (5.7 gpi), 780 (6.0 gpi), 720 (6.4 gpi), 670 (5.9 gpi), 620 (6.1 gpi), 570 (6.3 gpi), 520 (6.7 gpi), 470 (6.8 gpi), 430 (7.0 gpi), 400 (7.5 gpi), 370 (7.9 gpi)
- Easton 4MM HL Stainless Steel Break-Off Points (all spines use #1)
- Weight: 80-130 grains
- Easton 4MM ML Stainless Steel Break-Off Point (all spines use #1 or #2)
- Weight: #1 60-80 grains | #2 70-90 grains
GRAND ARCHERY BOWMAN | GOLD MEDAL | COMPOUND CARBON | ARROWS | PER DOZ
Gold Medal Recurve Arrows
The GAB Gold Medal arrow is an all-carbon shaft with a straightness tolerance of +/- .005in supplied with Rubber vanes and small groove pin nocks installed and break-off points supplied loose. Shafts are not pre-cut. 400-800 sizes are normally supplied with 80-100gr points, 900-1500 sizes supplied with 60-80gr points. Perfect for archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied items may vary. Cutting service not available on this item. Perfect for beginner archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied Components (may vary):- Vanes: - INSTALLED
- Nocks: Pin Nocks with Pins - Either small or large groove depending upon shaft size - INSTALLED
- Points: Break-off - Either 60-80gn or 80-100gn depending upon shaft size - SUPPLIED LOOSE
Note : Shipping Charges are extra As per Actual Basis
SKYLON | PRECIUM | ARROWS
Material: 40-TON Carbon
Inner Diameter: 3.2mm / .125"
Straightness Tolerance: ±.004"
The Skylon Precium arrows are constructed from 40-TON Carbon with a 3.2mm internal diameter this arrow is suitable for both compound and recurve bows to use for outdoor target shooting. Supplied as a set of 12.
FEATURES:
- Straightness: +/- 0.004"
- Inner Diameter:3.2mm / .125"
- Material: 40-TON Carbon
- Nock Pin Included (Points/Nocks available separately)
| SPINE | DIAMETER | STOCK LENGTH | GPI | RECOMMENDED POINT |
| .350" | 5.25mm | 32" | 8.47 | 100-110-120gr |
| .400" | 5.17mm | 32" | 7.93 | 100-110-120gr |
| .450" | 5.04mm | 32" | 7.42 | 100-110-120gr |
| .500" | 4.90mm | 32" | 6.90 | 100-110-120gr |
| .550" | 4.84mm | 32" | 6.50 | 100-110-120gr |
| .600" | 4.78mm | 32" | 6.10 | 100-110-120gr |
| .650" | 4.73mm | 32" | 5.83 | 80-90-100gr |
| .700" | 4.67mm | 32" | 5.55 | 80-90-100gr |
| .750" | 4.63mm | 32" | 5.31 | 80-90-100gr |
| .800" | 4.59mm | 32" | 5.06 | 80-90-100gr |
| .850" | 4.55mm | 32" | 4.94 | 80-90-100gr |
| .900" | 4.50mm | 32" | 4.81 | 60-70-80gr |
| 1.000" | 4.45mm | 32" | 4.70 | 60-70-80gr |
GRAND ARCHERY BOWMAN | GOLD MEDAL | RECURVE CARBON | ARROWS | PER DOZ
Gold Medal Recurve Arrows
The GAB Gold Medal arrow is an all-carbon shaft with a straightness tolerance of +/- .005in supplied with Rubber vanes and small groove pin nocks installed and break-off points supplied loose. Shafts are not pre-cut. 400-800 sizes are normally supplied with 80-100gr points, 900-1500 sizes supplied with 60-80gr points. Perfect for archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied items may vary. Cutting service not available on this item. Perfect for beginner archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied Components (may vary):- Vanes: - INSTALLED
- Nocks: Pin Nocks with Pins - Either small or large groove depending upon shaft size - INSTALLED
- Points: Break-off - Either 60-80gn or 80-100gn depending upon shaft size - SUPPLIED LOOSE
Reviews
There are no reviews yet.