SHREWD | ATLAS | DOUBLE SIDE V BAR | COMPOUNDS | V BARS
₹16,500.00
FEATURES
- FULLY ADJUSTABLE, DOUBLE V-BAR WITH TAPERED LOCKING JOINTS
- CNC MACHINED, 6061 ALUMINUM WITH GLOSS BLACK ANODIZED FINISH
- FEATURES LASER INDICATOR LINES AND STAINLESS STEEL HARDWARE
- INTEGRATED QUICK DISCONNECT FOR REAR STABILIZERS
- DISCONNECTS ARE 1″ IN DIAMETER
- INCLUDES BARREL NUTS AND MOUNTING HARDWARE
- WEIGHS 9.1 OZ INCLUDING BARREL NUTS
- WHEN USED WITH A REX EXTENDER ONE OF THE FOLLOWING ARE REQUIRED
- V-BAR ATTACHMENT BOLT
- STABILIZER QUICK DISCONNECT
- MADE IN THE USA
-
- HYBRID CLAMP-TAPER SYSTEM PRODUCES AN ULTRA-STRONG V-BAR IN A SMALL, LIGHTWEIGHT PACKAGE.
- INTEGRATED QUICK DISCONNECT (1” DIAMETER) MAKES INSTALLING AND REMOVING A REAR STABILIZER EFFORTLESS.
- REMOVABLE WRIST SLING ELIMINATES THE NEED FOR ADDITIONAL COMPONENTS THAT ADD WEIGHT AND COMPLICATE INSTALLATION.
- FEATURES PRECISION, LASER ENGRAVED INDICATOR LINES FOR REPEATABILITY AND PEACE OF MIND.
- CNC MACHINED FROM 6061 ALUMINUM, THE ATLAS WEIGHS ONLY 7.5 OZ.
- INCORPORATES SHREWD’S ANTI-WALKOUT WASHER SYSTEM TO PREVENT ANY STABILIZER WALKOUT IN THE INTEGRATED QUICK DISCONNECT.
- INDEPENDENTLY ADJUSTABLE HORIZONTAL AND VERTICAL AXIS.
- COATED WITH A DURABLE ANODIZED FINISH TO SEAL AND PROTECT ALL MACHINED ALUMINUM COMPONENTS.
- CONSTRUCTED USING ALL STAINLESS-STEEL HARDWARE FOR ADDITIONAL WEATHER RESISTANCE.
- RECONFIGURABLE TO MOUNT ON THE FRONT OR BACK OF THE RISER FOR BOTH LEFT AND RIGHT-HANDED SHOOTERS.
- WORKS IN CONJUNCTION WITH SHREWD’S QUICK DISCONNECT (SOLD SEPARATELY) FOR ADDING A FRONT STABILIZER.
- INCLUDES:MADE IN THE USA
- ATLAS DOUBLE V-BAR
- FLUSH MOUNTING BARREL NUTS
- 5/16”-24 X 1” SHCS
- 5/16”-24 X 0.5” SHCS
- BLACK, BRAIDED WRIST SLING
- 10-32 X 0.187” SET SCREWS
- SELF-RETAINING WASHERS
- INSTRUCTIONS
– Shrewd
Related products
SANLIDA | X10 | COMPOUND DAMPER | FOR COMPOUND BOW
Sanlida X10 Compound Damper
New damper system designed for use with compound bows. The Sanlida X10 Compound Damper is 284g of adjustable weights with a central rubber filled segment (the black bit) to provide ample dampening and vibration reduction for most compound bow setups. Each damper includes a single 28g, a double 56g and a quadruple 112g disk weight which can be added to or removed to suit your particular needs. Standard model as factory supplied weighs 284g and measures 72mm length x 30mm diameter. Additional Sanlida X10 Disk Weights and Disk Weight Screws are available separately. Features:- Colour: Black / Silver
- Materials: Aluminium, rubber, stainless steel
- Weight: 284g
- Dimensions: 72mm length x 30mm diameter
- Designed for compound bows
- Made in China
TOPOINT | TP-425 | COMPOUND BOW RELEASER
- Specifications:
- The Topoint release has a removable fourth finger extension, so the release can be used as a three or four finger release. This release aid has an adjustable thumb trigger and also a sensitivity adjustment setting.
Made of stainless steel with an anodised finish, the release comes in a hard case for added protection when you store it away.
This handheld thumb trigger release by Topoint is available in several colours.
INCLUDES:
- Release aid hard case
- "Fourth" finger module
- Allen keys
- Placement screws
- Replacement spring.
- 4 finger available
- aluminum enc machining body,
- S.S. jaw,adjustable sensitive,
- anodized 7 color select red black,smoke,green,
- blue golden, purple
BEITER | BEITER SCOPE 29| COMPOUNDS | SIGHTS SCOPES
The Beiter Scope Ø29 Standard was the first product Werner Beiter designed specially for Compound archers. The Beiter Scope Ø29 Standard is equipped with a convex/concave ZEISS Silicate (Glass) lens.
Due to the use of a Glass Lens the Beiter Scope Ø29 Standard is the cheapest alternative for a Compound archer to shoot a ZEISS lens, known over the world to be one of the best manufacturer for optics worldwide. Beiter is the only manufaturer using original ZEISS lenses for all their Scopes!
The Beiter Scope-Body is made out of high quality plastic; it is injected and engaged directly on a steel-thread.
The Beiter Scope Ø29 Standard can be ordered in following options:
- Scope-Body, RH or LH,
- Thread #10-32 or #8-32
- Colour: Clear, Black, Red and Green
- extra-coated convex/concave Silicate Lens (Glass) made by ZEISS, Ø29mm available in following doptries (approx.magnification): +0,25 (2X), +0,50 (4X), +0,75 (6X), +1,00 (8X), +1,25 (10X)
- Level in Holder: Green/Clear, Red/Clear or Blue/Clear
- Thread Ring Clear with Crosshair, Hole-Ø1,5mm
- Fluor Pin Ø1,5/1,5mm, Red
- Scope Tool
- O-Ring for Lens
HOYT | HYPER EDGE | COMPOUND BOW
Specifications:
Hoyt has built the top dog of tournament bows with the HyperEdge.
There are so many features that are built into the HyperEdge, it is destined to perform no matter what tournament it's entered into.
Starting with the modular grip system which gives the archer an ability to change the grip angle to desired aiming preferences. This is a fully customisable grip system allowing the bow to be perfectly tuned to the archer's specific hand position.
The DFX cam system incorporates two cable stops which make for a very solid back wall. If you're looking for absolutely no give at all, install the optional limb stop for a wall that simply will not budge.
At 36 inches axle to axle the UltraFlex Limbs and DFX Cam and a Half work in sync which actually allows a longer axle to axle at full draw. This makes the HyperEdge hold and aim like it's a 40 inch non parallel limb bow.
Hoyt added yet another feature to the HyperEge including the ZT cable guard into the bow. The ZT cable guard system is proven to eliminate torque at full draw and also increase smoothness in the draw cycle.
Top it off with a super forgiving brace height of 7 inches and an actual ATA speed of 325fps and the HyperEdge really has it all.
Smooth to draw, easy to aim, solid back wall and the adjustability to fine tune the bow will suit any style.
The stability of the Hyper Edge is incredible and after the shot there is minimum hand shock. Hoyt listened to archers around the world and have designed the ultimate in tournament bows.
Look out for the HyperEdge at the top of the leader board at archery tournaments across the globe.
Specs at a glance
ATA Speed 325fps
Weight range 30-40lbs, 40-50lbs, 50-60lbs, 60-70lbs. Please specify weight required.
Draw length range 25.5"-27.5", 27.5"-29.5", 29.5"-31.5". Please specify draw length
Brace height 7"
Axle to Axle 36"
Mass weight 4.5lbs
Let-Off 75%
DFX Cam & 1/2 Cam
Riser Aluminium
Ultra Flex Limb technology
Parallel split limb technology
Multi-layer limb lamination
Zero Torque Cable Guard system
Pro Lock Limb Pocket system
In-line roller cable guard
Perfect balance stabilisation system
Dual Cable Stops
Optional Limb Stop
Modular Grip System
Air Shox
Stealth Shot
Shock Rod
FUSE Strings and Cables
Available in Right Hand and Left Hand. Please specify RH or LH
Available in a standard hunting colour option of Black Out.
Custom Colour Accessories. Hoyt Stealth Shots, AirShox or LimbShox, Shock Rods and Pro Fit Wood Grip accessories are available in 9 great accent colours to customise your look. Components are sold individually, or in a custom 10 piece accessory kit.
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Custom Colour Accessories. Hoyt Stealth Shots, AirShox or LimbShox, Shock Rods and Pro Fit Wood Grip accessories are available in 9 great accent colours to customise your look. Components are sold individually, or in a custom 10 piece accessory kit.
Prices are Negotiable for Regular customers at many Products. Be our regular Customer. 
HOYT | NEW | CONCEPT X | 40 | COMPOUND BOW
The Hoyt Concept X 37 and 40 represent the exceptional engineering archers expect from Hoyt. With a riser, limb system, and cam system all designed to complement each other, the Concept X gives shooters an extremely stable foundation for seeking out target archery perfection.
Starting with a riser that minimizes rotational translation, adding a limb system that is the most torsionally stable we have ever designed, and wrapping it up with the SCTR cams - the culmination of two decades of Hoyt Cam & 1/2 and HB cam systems rolled into one. The Concept X beats the standards you expect from Hoyt.
327 FPS (ATA)
4.9 Weight (lbs)
40" Axle-to-Axle
26"-32" Draw Length w/Spec Mod
7.25" Brace Height
27-30" Draw Length w/CDM Mod
Shipping Charges Extra As Per Actual Basis
HOYT | PREVAIL 40 SVX | COMPOUND BOW
Specifications:
Pound: 50-60Lbs
Bow Cams: SVX
Limbs: XT 2000
Speed: 317 & 312 feet per sec.
Axle to Axle: 40 1/4 inches
Brace Height: 7.625 & 7.75 inches
Draw length : SVX CAM #2 26.5-27.5"Draw
CARTEL | 207 | SIGHT SCOPE | COMPOUND BOW
Cartel scope made of a light-weight aluminum housing. An anti-reflective coating is applied to the lens, which doesn't only protect you from glare in your aiming picture but also offers slight protection against scratches on the surface of the glass.
Specifications Cartel 207 Scope:
- Aluminum housing
- Lens with anti-reflection coating
- 30 mm diameter
- Standard 10/32 thread
- Available magnification: .50 (x4), .75 (x6), 1.0 (x8)
- Suited for both right- and left-handed archers
- Dots are not included
HOYT | NEW | CONCEPT X | 37 | COMPOUND BOW
The Hoyt Concept X 37 and 40 represent the exceptional engineering archers expect from Hoyt. With a riser, limb system, and cam system all designed to complement each other, the Concept X gives shooters an extremely stable foundation for seeking out target archery perfection.
Starting with a riser that minimizes rotational translation, adding a limb system that is the most torsionally stable we have ever designed, and wrapping it up with the SCTR cams - the culmination of two decades of Hoyt Cam & 1/2 and HB cam systems rolled into one. The Concept X beats the standards you expect from Hoyt.
Reviews
There are no reviews yet.