HOYT | CABLE SLIDER | COMPOUNDS | COMPOUND BOW PARTS
₹1,800.00
- One of the best slides on the market according to the Urban Archery staff. Suits Hoyt bows as well as most other brands that have a standard cable guard rod
- The Hoyt Cable Guard Glide Pro Slide has an inside slide to separate cables, reduce noise and increase arrow speed.
To correctly install the slide on most Hoyt bows, firstly place the glide on the cable guard bar and push the control cable into the shorter front slot. Then push the buss cable into the longer rear slot. A word of caution – do not pull the bow back without proper installation of the cable guard bar and slide.
Specially designed for Hoyt compound bows with a cable slide for 3-8″ round cable rods.
Related products
ACTIVE ARCHERY | BOW STAND | COMPOUND BOW
Convenient, folding bow stand fits in your quiver.
- Lightweight
- Folds up to fit in your pocket
- Lightweight, compact, folding kick stand for all bows
- Spring-loaded to stay on bow
- Bow rests on stand and stabilizer, keeps cam out of the dirt
SANLIDA | X9 | STABILIZER DAMPER | FOR RECURVE AND COMPOUND BOW
X9 Stabilizer Damper
- New generation in stabilizer vibration dampening technology.
- The best choice to reduce vibration and noise.
- Color: Black
- Weight：41.6g
BEITER | BEITER SCOPE 29| COMPOUNDS | SIGHTS SCOPES
The Beiter Scope Ø29 Standard was the first product Werner Beiter designed specially for Compound archers. The Beiter Scope Ø29 Standard is equipped with a convex/concave ZEISS Silicate (Glass) lens.
Due to the use of a Glass Lens the Beiter Scope Ø29 Standard is the cheapest alternative for a Compound archer to shoot a ZEISS lens, known over the world to be one of the best manufacturer for optics worldwide. Beiter is the only manufaturer using original ZEISS lenses for all their Scopes!
The Beiter Scope-Body is made out of high quality plastic; it is injected and engaged directly on a steel-thread.
The Beiter Scope Ø29 Standard can be ordered in following options:
- Scope-Body, RH or LH,
- Thread #10-32 or #8-32
- Colour: Clear, Black, Red and Green
- extra-coated convex/concave Silicate Lens (Glass) made by ZEISS, Ø29mm available in following doptries (approx.magnification): +0,25 (2X), +0,50 (4X), +0,75 (6X), +1,00 (8X), +1,25 (10X)
- Level in Holder: Green/Clear, Red/Clear or Blue/Clear
- Thread Ring Clear with Crosshair, Hole-Ø1,5mm
- Fluor Pin Ø1,5/1,5mm, Red
- Scope Tool
- O-Ring for Lens
SANLIDA | X10 | COMPOUND DAMPER | FOR COMPOUND BOW
Sanlida X10 Compound Damper
New damper system designed for use with compound bows. The Sanlida X10 Compound Damper is 284g of adjustable weights with a central rubber filled segment (the black bit) to provide ample dampening and vibration reduction for most compound bow setups. Each damper includes a single 28g, a double 56g and a quadruple 112g disk weight which can be added to or removed to suit your particular needs. Standard model as factory supplied weighs 284g and measures 72mm length x 30mm diameter. Additional Sanlida X10 Disk Weights and Disk Weight Screws are available separately. Features:- Colour: Black / Silver
- Materials: Aluminium, rubber, stainless steel
- Weight: 284g
- Dimensions: 72mm length x 30mm diameter
- Designed for compound bows
- Made in China
HOYT | NEW | CONCEPT X | 40 | COMPOUND BOW
The Hoyt Concept X 37 and 40 represent the exceptional engineering archers expect from Hoyt. With a riser, limb system, and cam system all designed to complement each other, the Concept X gives shooters an extremely stable foundation for seeking out target archery perfection.
Starting with a riser that minimizes rotational translation, adding a limb system that is the most torsionally stable we have ever designed, and wrapping it up with the SCTR cams - the culmination of two decades of Hoyt Cam & 1/2 and HB cam systems rolled into one. The Concept X beats the standards you expect from Hoyt.
327 FPS (ATA)
4.9 Weight (lbs)
40" Axle-to-Axle
26"-32" Draw Length w/Spec Mod
7.25" Brace Height
27-30" Draw Length w/CDM Mod
Shipping Charges Extra As Per Actual Basis
EK ARCHERY | BUSTER | YOUTH | COMPOUND BOW
SPECIFICATION
- DRAW WEIGHT 15-29 LBS
- AXLE TO AXLE 25"
INFORMATION
Brace Height : 7" Let-off : 75% Draw length : 18"~26"
SHIBUYA | ULTIMA CPXIII | SIGHT | COMPOUND BOW
FEATURES
SIGHT SCALE PLATES
MAGNIFIER COMPATIBLE
The Scale Magnifier mounts to the flat shelf indicator’s groove, enabling higher precision elevation adjustments than ever.
(sold separately)
ZPE SYSTEM【Patent pending】
ULTIMA CPX sights feature a revolutionary system eliminating backlash and play in the elevation adjustments: the ZPE system. A readjustable aluminum wedge, secured with Nord-Lock® washers, eliminates any gap between the threaded locking block and aperture block.
FLAT SHELF INDICATOR PIN
The new flat-shelf indicator pin on ULTIMA CPX sights is easy to adjust, closer to the sight tape surface than ever before, while still offering enough clearance for layered tapes. Both side pins are locked by a cap screw from the side, preventing accidental movements when locking them down!
TRIA-LOCK SYSTEM
Shibuya’s innovative Tria-Lock system keeps the scope rod approx. 1/2″ closer to the elevation bar than conventional target sights. This significantly reduces moment effected on the windage unit – a significant factor in development of play and faults!
The innovative new Tria-Lock system encloses the scope rod holder from three sides, keeping it perfectly aligned and without play to produce a rattle-free, zero-tolerance environment.
X-Lock System US Pat No. 7,287,335
Re-adjustable, zero-tolerance fit between the windage unit and sight frame. Super-slick and durable polyacetal resin guide spacers enclose the elevation rail, re-adjustable at the turn of a set screw. All parts field-adjustable and -replaceable!
Reviews
There are no reviews yet.