Related products
EASTON | INSPIRE CARBON ARROWS COMPLETE | ARROWS & ACCESSORIES | ARROWS CARBON & POINTS
- Brand: Easton
- Model: Inspire carbon arrows
- Material: Carbon construction
- Complete Set: Arrows come fully assembled with points included
- Application: Designed for target shooting and beginner archers
- Spine: Available in various spine options to match different bow setups
- Length: Standard arrow lengths typically range from 28 to 32 inches
- Diameter: Typically available in standard diameters suitable for various bows
- Fletching: Equipped with vanes or feathers for stability during flight
- Nock: Includes nock at the back end to interface with the bowstring
- Accessories: May include additional components such as arrow wraps or inserts
- Packaging: Sold in packs containing multiple arrows
EASTON | X10 PROTOUR ARROW SHAFTS WITH POINTS (ALL SERIES) | ARROWS & ACCESORIOS | ARROWS CARBON & POINTS
Description
The Easton X10 Pro Tour Shaft is a competition-grade arrow built especially for compound bow shooters. The shaft is one diameter from the nock end to near the middle, and then it tapers down toward the point. This allows the arrow to have a small, wind-cutting front diameter, while maintaining a stiff spine to handle high compound draw weights.
• Since it's introduction the compound specific X10 ProTour has won more titles and set more records than all other choices
• Small outside diameter with a heavier mass weight reduces wind drift and increases accuracy
• High strength carbon fiber bonded to a 7075 alloy core
• Reverse taper design to deal with the force imparted by compound bows
• 9-micron polished carbon finish
• Guaranteed straightness: ± .0015"
• Weight Tolerance: ± 0.5 grains
• Components sold separately
• Sold by the dozen
770 (6.0 gpi), 720 (6.2 gpi), 670 (6.5 gpi), 620 (6.7 gpi), 570 (6.9 gpi), 520 (7.3 gpi), 470 (7.6 gpi), 420 (8.0 gpi), 380 (8.4 gpi)
EASTON X10 | PARALLEL PRO | ARROW SHAFTS ONLY | PACK OF DOZEN
ABOUT THE PRODUCT
Experience the World’s Finest Arrow with the X10 4mm Parallel Pro.
Renowned as the arrow of choice for Olympic champions, the X10 sets the standard for precision and quality in archery. The new Parallel Pro carries this legacy forward as a lightweight, easy-tuning 4mm shaft crafted with the highest tolerances and high-modulus carbon fiber. Designed for recurve, compound, target, field, and barebow disciplines, the Parallel Pro delivers unmatched accuracy and performance for serious archers worldwide.
New for Bowhunters: Factory-Fletched Parallel Pro
For the first time, the legendary X10 quality is available in a hunting-specific configuration. The factory-fletched Parallel Pro features AAE Hybrid 26 vanes, Microlite Nocks, and 4mm Match Grade 55-grain Half-outs, combining precision and durability in a lightweight aluminum/carbon A/C hunting shaft. Available in four spines—250, 300, 340, and 380—the Parallel Pro brings X10’s world-class tolerances to bowhunting, giving archers the edge they need in the field.
SPECIFICATIONS
– High-strength carbon fiber bonded to a 7075 alloy core – Straightness: ± .001” – Weight tolerance: ± 0.5 grains in precise weight codes – Components sold separately
https://youtu.be/AnmWAaQK2l4
EASTON | FMJ MATCH ARROW SHAFTS | ARROWS & ACCESSORIES | ARROWS CARBON & POINTS
-
The 4MM FMJ offers the most penetration and is precision-made in USA for the most accurate hunting arrow on the market!
The 4MM Full Metal Jacket has been updated with a new spine configuration, an all-new 8-32 point outsert system, and a redesigned graphics. The standard 8-32 thread point outsert optimizes front-of-center for easier broadhead tuning and more durability.
FMJ starts with an advanced carbon core foundation for lightweight strength. A full metal jacket adds kinetic energy, enhances accuracy, and pulls easier from targets. The combination provides the deepest penetration and more pass-through impacts for quicker kills and heavier blood trails.
4mm FMJ
SIZE SHAFT WEIGHT GPI SPINE @ 28″ SPAN DEFLECTION IN INCHES STOCK LENGTH INCHES DEEP SIX FIELD POINT 100/125 GRAINS O.D. INCHES 4MM HALFOUT 400 9.8 0.400 31.5 DP6-4 0.234 #2 340 11.0 0.340 32 DP6-5 0.240 #3 300 11.7 0.300 32.5 DP6-6 0.244 #4 250 12.3 0.250 33 DP6-5 0.247 #5 - 4mm Aluminum Point Outsert included (50 grains)
- 4mm Micro- Diameter carbon core with 7075 alloy jacket
- Pre-installed 4mm Nocks
- Easy target Pull
- Straightness +/- .003” (Also available in .001” Match Grade version)
- Made in the USA
-Podium Archery can custom cut your arrow shafts for you. Please refer to the custom arrow builder to request a length.
TEN RING | RECRUIT FIBER ARROWS | ARROWS & ACCESORIOS | FIBER ARROWS
- Brand: Ten Ring
- Model: Recruit Fiber Arrows
- Type: Fiber Arrows
- Material: Constructed from durable composite materials
- Compatibility: Suitable for use with various types of bows (e.g., recurve, compound)
- Design: Engineered for accuracy and consistency in flight
- Fletching: Equipped with vanes or feathers for stability
- Nock: Includes a nock at the back end to interface with the bowstring
- Point: Typically comes with a field point or target point installed
- Length: Standard arrow lengths typically range from 28 to 32 inches
- Packaging: Sold in packs containing multiple arrows
PANDARUS | ELITE CA320 | SHAFTS,POINTS,PINS & NOCKS |ARROWS (DOZ)
CA320 is an evolutional version of ELITE XT designed for Olympic target shooting, spindled shape based on CAC construction Offering the competitive shooter exceptional speed and accuracy with little worry of wind drift, it’s almost an unfair advantage compare with any other pure carbon arrows, taper tail providing the incredible clearance and release forgiveness, it can provide the strong and stable output, it’s the ultimate arrow for Long distance targeting shoot.
Specifications:
- High-strength carbon fibre bonded to a 7075 alloy core
- Straigtness Of ±0.0015"
- Weight Tolerance Of ±1.0gn
- Inner Diameter: 3.2mm
- 7 Available Spines : 350, 380, 410, 450, 500, 550, 600
- Stainless Steel Break Of Points Included
- Nock Pins And Collars Included
- Pin Nocks Included (Colour May Vary)
- Features Spin-Wing Lines Marked On The Shaft Already
- Barrelled design
| SPINE | OD (mm) | GPI | STOCK LENGTH |
| 325 | 5.82 | 9.20 | 32" |
| 350 | 5.71 | 8.90 | 32" |
| 380 | 5.57 | 8.68 | 32" |
| 410 | 5.48 | 8.60 | 32" |
| 450 | 5.30 | 8.12 | 32" |
| 500 | 5.26 | 7.81 | 32" |
| 550 | 5.22 | 7.62 | 32" |
| 600 | 5.10 | 7.06 | 30" |
| 650 | 5.01 | 6.80 | 30" |
| 700 | 4.92 | 6.50 | 29" |
| 750 | 4.90 | 6.44 | 29" |
| 830 | 4.87 | 6.20 | 29" |
| 900 | 4.70 | 6.06 | 28" |
| 1000 | 4.67 | 5.50 | 28" |
Reviews
There are no reviews yet.