Related products
EASTON | X10 PROTOUR ARROW SHAFTS WITH POINTS (ALL SERIES) | ARROWS & ACCESORIOS | ARROWS CARBON & POINTS
Description
The Easton X10 Pro Tour Shaft is a competition-grade arrow built especially for compound bow shooters. The shaft is one diameter from the nock end to near the middle, and then it tapers down toward the point. This allows the arrow to have a small, wind-cutting front diameter, while maintaining a stiff spine to handle high compound draw weights.
• Since it's introduction the compound specific X10 ProTour has won more titles and set more records than all other choices
• Small outside diameter with a heavier mass weight reduces wind drift and increases accuracy
• High strength carbon fiber bonded to a 7075 alloy core
• Reverse taper design to deal with the force imparted by compound bows
• 9-micron polished carbon finish
• Guaranteed straightness: ± .0015"
• Weight Tolerance: ± 0.5 grains
• Components sold separately
• Sold by the dozen
770 (6.0 gpi), 720 (6.2 gpi), 670 (6.5 gpi), 620 (6.7 gpi), 570 (6.9 gpi), 520 (7.3 gpi), 470 (7.6 gpi), 420 (8.0 gpi), 380 (8.4 gpi)
GRAND ARCHERY BOWMAN | GOLD MEDAL | RECURVE CARBON | ARROWS | PER DOZ
Gold Medal Recurve Arrows
The GAB Gold Medal arrow is an all-carbon shaft with a straightness tolerance of +/- .005in supplied with Rubber vanes and small groove pin nocks installed and break-off points supplied loose. Shafts are not pre-cut. 400-800 sizes are normally supplied with 80-100gr points, 900-1500 sizes supplied with 60-80gr points. Perfect for archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied items may vary. Cutting service not available on this item. Perfect for beginner archers looking to start competitive shooting. There is no choice on nock/vane colours. Pack of 12. Supplied Components (may vary):- Vanes: - INSTALLED
- Nocks: Pin Nocks with Pins - Either small or large groove depending upon shaft size - INSTALLED
- Points: Break-off - Either 60-80gn or 80-100gn depending upon shaft size - SUPPLIED LOOSE
Note : Shipping Charges are extra As per Actual Basis
EASTON | VEKTOR | CARBON ARROWS WITH RUBBER VANES | ARROWS | PER DOZEN
OVERVIEW:
Easton’s New Vector is a 4mm 100% carbon-fiber arrow engineered using the same high-performance processes used in advanced tournament arrows, but priced for value conscious consumers, making the Vector ideal for archers who may be getting started in target archery or quickly progressing to higher poundage bows and needing to change arrow setups to match. All Vector arrows come pre-cut to length and ready-to-shoot with factory fletched 2.3” feather vanes, points, and preinstalled nocks; making it the perfect arrow for clubs, recreational archery ranges and beginners of all ages.
Vector is available in 5 pre-cut-to-length spines (600, 800, 1000, 1200, 1400, 1600, 1800, & 2000)
Sold in ready-to-shoot factory feather fletched configurations only. Compatible with a wide-range of standard 4mm components.
PURPOSE:
Ready-to-shoot club/beginner target arrow
FEATURES:
- Multi-layer wrapped 100% carbon-fiber construction
- 4mm parallel design
- Straightness checked
- Weight matched
- Factory fletched with 2.3″ Vane
- Ready to shoot – cut to length with nocks & points included
- Available in Spring 2023
PANDARUS | ELITE CA320 | SHAFTS,POINTS,PINS & NOCKS |ARROWS (DOZ)
CA320 is an evolutional version of ELITE XT designed for Olympic target shooting, spindled shape based on CAC construction Offering the competitive shooter exceptional speed and accuracy with little worry of wind drift, it’s almost an unfair advantage compare with any other pure carbon arrows, taper tail providing the incredible clearance and release forgiveness, it can provide the strong and stable output, it’s the ultimate arrow for Long distance targeting shoot.
Specifications:
- High-strength carbon fibre bonded to a 7075 alloy core
- Straigtness Of ±0.0015"
- Weight Tolerance Of ±1.0gn
- Inner Diameter: 3.2mm
- 7 Available Spines : 350, 380, 410, 450, 500, 550, 600
- Stainless Steel Break Of Points Included
- Nock Pins And Collars Included
- Pin Nocks Included (Colour May Vary)
- Features Spin-Wing Lines Marked On The Shaft Already
- Barrelled design
| SPINE | OD (mm) | GPI | STOCK LENGTH |
| 325 | 5.82 | 9.20 | 32" |
| 350 | 5.71 | 8.90 | 32" |
| 380 | 5.57 | 8.68 | 32" |
| 410 | 5.48 | 8.60 | 32" |
| 450 | 5.30 | 8.12 | 32" |
| 500 | 5.26 | 7.81 | 32" |
| 550 | 5.22 | 7.62 | 32" |
| 600 | 5.10 | 7.06 | 30" |
| 650 | 5.01 | 6.80 | 30" |
| 700 | 4.92 | 6.50 | 29" |
| 750 | 4.90 | 6.44 | 29" |
| 830 | 4.87 | 6.20 | 29" |
| 900 | 4.70 | 6.06 | 28" |
| 1000 | 4.67 | 5.50 | 28" |
EASTON | ACG ARROW SHAFTS (ALL SERIES) | ARROWS & ACCESSORIES | ARROWS CARBON & POINTS
-
Description
- A/C/E is the arrow that started a revolution that continues to this day
- One of the most accurate, advanced target shafts ever produced
- Lightweight carbon fiber bonded to a precision 7075 alloy core
- Barrel-shaped to maximize stiffness
- 9-micron polished carbon finish
- Guaranteed straightness: ± .0015"
- Weight Tolerance: ± 0.5 grains
- Components sold separately
- Sold by the dozen
- Weight: 1250 (5.1 gpi), 1100 (5.1 gpi), 1000 (5.7 gpi), 920 (5.8 gpi), 850 (5.7 gpi), 780 (6.0 gpi), 720 (6.4 gpi), 670 (5.9 gpi), 620 (6.1 gpi), 570 (6.3 gpi), 520 (6.7 gpi), 470 (6.8 gpi), 430 (7.0 gpi), 400 (7.5 gpi), 370 (7.9 gpi)
- Easton 4MM HL Stainless Steel Break-Off Points (all spines use #1)
- Weight: 80-130 grains
- Easton 4MM ML Stainless Steel Break-Off Point (all spines use #1 or #2)
- Weight: #1 60-80 grains | #2 70-90 grains
Reviews
There are no reviews yet.