| SIZE | 12", 13.5", 15" |
|---|
RAMRODS | ULTRA V4 | SHORT BAR | SHORT STABILIZER
₹13,800.00
Ultra v4
The recurve stabilizer of the future. The ultimate performance for outdoor competition regardless of the conditions.
NOTE:
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS
SPECIFIC SIZE WOULD BE AVAILABLE ON SPECIAL ORDER
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Related products
WIN&WIN | WIAWIS | HMC PLUS CARBON | RECURVE’S | SHORT STABILIZERS
Recurve archers strive for higher arrow speeds, but this results in increased vibration in the bow.
Up until now, stabilisers have not been able to effectively deal with this. Win & Win specifically designed the HMC Plus to address this issue. The system also improves dampening, absorbs shock and helps control torque during shooting.
While other stabilisers have a consistent wall thickness along their length that does not fully absorb vibration, the wall thickness of HMC Plus varies.
At the front of the rod the wall is 0.0275” (0.7mm) thick, gradually growing to 0.0787” (2mm) at the base. When installed with an extender as a full stabilisation system, HMC Plus effectively absorbs the shock produced by shooting a recurve bow.
FEATURES:
- Varying wall thickness for vibration absorption.
- Designed to be shot as a full system with extender
- Length: 10", 11", 12"
- Weight: 141g, 145g, 156g
- Colours: Matte Black, Black, Gold/Black, Blue, Red, White
RAMRODS STABILIZER WEIGHT TUNGSTEN SOLID 4 OZ
Tungsten Damping Weight
Using patented vibration reduction technology, this weight rapidly dissipates harmful, high-frequency vibrations.
Available in both stainless steel (4oz) and 3DP resin (1-3oz) configurations for maximum adjustability and vibration control.
RAMRODS | VEKTOR | LONG & SHORT BARS
Description
The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market.
The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56 inch to 0.5 inch taper.
Features
-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~90
-Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots in proximal endcap for tightening with a wide range of common tools.
-Made in the USA | designed and hand-built by the owners
-30″ Vektor with standard VIBRO-CORE weighs 5.6oz and with Tungsten Damping weighs 8.6oz
RAMRODS K2 V2.1 STABILIZER- SHORTS
Ramrods K2 V2 Stabiliser Series - A Small Diameter Competition Stabiliser Based On The Original, Very Popular, K2 Design. Ramrods Has Updated The Graphics And Endcaps, Added Internal Damping, And Optimized Its Stiffness And Shot Response Based On Archers' Feedback.
Standard features of the Ultra:
- Adaptive Weight System – allows for either 1/4-20 or 5/16-24 thread sizes by swapping out the adapter screw.
- VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
- Diameter – 0.5625"
- 5/16-24 threads on both proximal and distal endcap.
- Aluminum proximal and distal endcaps.
- Flat slots in proximal and distal endcaps for stabilizer tightening with a wide range of common tools.
- Made in the USA - designed and hand-built by the owners.
WIN&WIN | WIAWIS | WIAWIS S21 CARBON | RECURVE’S | SHORT STABILIZERS
Target style stabilizer from Win&Win.
Key features:
- Increased stiffness and stability compared to earlier models.
- Reinforced, high strength, anti-resistance foam.
- Available in 10, 11 and 12" lengths.
Win & Win S21 stabilisers reinforce the performance of present HMC Plus stabilisers with a graphene foam core and they was developed with a focus on improving shooting feeling.
As already known with the HMC Plus stabiliser, W&W increased stiffness using tapered tube on the end part of the stabiliser. It reduces unnecessary movement by eliminating vibration after shooting and controlling shock and vibration transferred from limb movement.
W&W S21 stabiliser features not only offer better shooting feeling but also give technological advancements on current competitive stabilisers.
SPECIFICATIONS:
- Length: 10", 11", 12", 14", 15"
- Weight: 175g, 180g, 185g, 200g, 205g
- Colours: Red, Gloss Black, Blue, Yellow, Matte Black
Prices are negotiable for regular customers at many products . Be our regular customer .
Sanlida X10 | Recurve Stabilizer Side Rod RC BAR | STABILIZER SET
*Full carbon materail stabilizer *Absorb vibration very well *More length and color for your option
- Length：11” 12”
- Material：Carbon
- Diameter：18mm
Reviews
There are no reviews yet.