AVALON | POWER | SHORT STABILIZER
₹7,500.00
SPECIFICATION:-
- Material: 46T carbon
- 14mm diameter bar for better wind resistance.
- Avalon Powr damper included.
- 2x 2oz weights included.
- Available in 10″, 12″, 15″
- Weight thread size: 1/4″
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS
SPECIFIC SIZE WOULD BE AVAILABLE ON SPECIAL ORDER
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Related products
CARTEL | MAXION CARBON | LONG BAR | STABILISER SET | RECURVE & COMPOUND BOW
This is a good choice for either compound or recurve archers who want a lightweight stabilizer that will kill vibration, at an affordable price. If you decide you want to increase your end weight, the threaded cap accepts add-on weights.
• Versatile, mid-range stabilizer at a great value • High modulus full carbon construction • Outside diameter: 17mm • Includes CX500 damper weight for enhanced dampening • Weight: 26" (3.6 oz.), Weight: 28" (3.7 oz.), Weight: 30" (3.9 oz.),Cartel Maxion Carbon Stabilizer:
The Maxion Carbon is a highly versatile 17mm diameter mid-range carbon stabilizer at an incredibly low price. Constructed from high modulus carbon. It features an integral CX500 damper weight for enhanced dampening properties and is available in black, blue and red colours with a fresh new design.- Lengths:
- 26in
- 28in
- 30in
- Colours:
- Black
- Blue
- Red
- Material: High modulus carbon
- Diameter: 17mm
- Threads: 5/16in base / 1/4in end
- CX500 damper weight included
AVALON | TEC X CARBON | RECURVE’S | SHORT STABILIZERS PER PCS
-
The tec X Olympic 22mm stabiliser from Avalon. Made of high modulus carbon, combining a stiff action with very good damping qualities. SIZE : 12" , 15" COLOUR : Black
-
- NOTE :
- Shipping charges are extra as per actual basis.
-
RAMRODS | VEKTOR | LONG & SHORT BARS
Description
The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market.
The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56 inch to 0.5 inch taper.
Features
-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~90
-Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots in proximal endcap for tightening with a wide range of common tools.
-Made in the USA | designed and hand-built by the owners
-30″ Vektor with standard VIBRO-CORE weighs 5.6oz and with Tungsten Damping weighs 8.6oz
FIVICS |SKADI-BX |SHORT STABILIZER
- Manufactured with an advanced blow method that enhances the strength of the carbon shaft and allows for more energy to be absorbed
- Crosswind Zero design enables stable aiming even in unpredictable winds
- The end of the carbon stabilizer tapers to a 17mm diameter without adding a metal cap.
- Center diameter of 13.5mm
- Super Graphite prepreg carbon
- Weight: 98g (12”)
- DC1500s Damper and 78g Weight Stack Included
- Each Sold Separately
AVALON | TEC ONE CARBON | RECURVE’S | SHORT STABILIZERS PER PCS
Narrow diameter and stiffness in a great value stabilizer. The Avalon Tec One 18 Xtra-Stiff is constructed from high modulus carbon material and includes a damper and end weights. Available in 10in, 12in, 15in and 32in lengths. 18mm diameter. Black colour with a choice or gold or silver graphics.
- Colour: Black with gold or silver graphics
- Diameter: 18mm
- Lengths: 10in, 12in, 15in
- Material: High Modulus carbon
- Damper and end weights included
- Thread: 5/16IN
- SIZE : 15"
- NOTE :
- Shipping charges are extra as per actual basis.
Specific colours would be avaliable on speacial order .
Prices are negotiable for regular customers at many products . Be our regular customer .
RAMRODS K2 V2.1 STABILIZER- SHORTS
Ramrods K2 V2 Stabiliser Series - A Small Diameter Competition Stabiliser Based On The Original, Very Popular, K2 Design. Ramrods Has Updated The Graphics And Endcaps, Added Internal Damping, And Optimized Its Stiffness And Shot Response Based On Archers' Feedback.
Standard features of the Ultra:
- Adaptive Weight System – allows for either 1/4-20 or 5/16-24 thread sizes by swapping out the adapter screw.
- VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
- Diameter – 0.5625"
- 5/16-24 threads on both proximal and distal endcap.
- Aluminum proximal and distal endcaps.
- Flat slots in proximal and distal endcaps for stabilizer tightening with a wide range of common tools.
- Made in the USA - designed and hand-built by the owners.
AAE | STREET HOT RODZ CARBON | RECURVE’S | SHORT STABILIZERS PER PCS
It is constructed from a proprietary blend of ultra-stiff high modulus carbon, making it the stiffest and most forgiving of any bar available.
DESCRIPTION
• Street Rodz was specifically designed to allow archers to maximize their stabilization potential while remaining on a budget
• Street Rodz features hi-modules carbon with the fit and finish AAE customers have come to expect
• The perfect stabilizer for youth and beginning archers
• Weights sold separately
• 24" (4.9 oz.), 27" (5.1 oz.), 30" (5.5 oz.)
SIZE : 10 "
COLOUR : BLACK
NOTE:
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS.
SPECIFIC COLOR WOULD BE AVAILABLE ON SPECIAL ORDER.
Prices are Negotiable for Regular customers at many Products. Be our regular Customer.
Reviews
There are no reviews yet.