FIVICS |SHADI-BX| STABILIZER – LONG
₹20,800.00
Fivics’ Brand New Product Line; The Skadi Series!
The Skadi-TX stabilisers are manufactured with an advanced blow method to highlight the strengths of the carbon shaft.
This method of construction increases the specific gravity of the carbon fiber rather than that of the resin, which greatly strengthens the physical properties of the stabiliser while also allowing for more energy to be absorbed.
The crosswind zero design enables stable aiming even in unpredictable winds, and the tip of the stabiliser has a thicker diametre to increase vibration reduction.
Through blow molding, the front cap of the stabiliser is integrated into the rest of the shaft without the need of installing an aluminium cap.
The Skadi-TX stabilisers feature improved physical properties by having a reduced resin content and increased raw oil content.
The inside and outside of the stabiliser is composed of a fabric carbon pattern to improve durability.
The vibration damping effect is increased through integrally molding the tip of the stabilisers with full carbon.
Available in lengths: 26″ / 28″ / 30″
Weight: approx 172g (28″)
Material: Super graphite carbon prepreg
Diametre: 13.5mm
Related products
SKYLON|PARAGON|ARROW
Specifications:
- Material: 40-TON Carbon
- Takes Skylon 3.2 components
- Inner Diameter: 3.2mm / .125"
- Straightness Tolerance: ±.0015"
- Includes 12 pins
- It is essential to select an arrow spine that corresponds to the archer's draw weight and draw length. Please see below for the arrow selection chart.
-
The Skylon Paragon arrows are constructed from 24-TON Carbon with a 3.2mm internal diameter this arrow is suitable for both compound and recurve bows to use for outdoor target shooting. Supplied as a set of 12. FEATURES:
- Straightness: +/- 0.0015"
- Inner Diameter:3.2mm / .125"
- Material: 24-TON Carbon
- Nock Pins included
SPINE DIAMETER STOCK LENGTH GPI RECOMMENDED POINT .350" 5.25mm 32" 8.47 100-110-120gr .400" 5.17mm 32" 7.93 100-110-120gr .450" 5.04mm 32" 7.42 100-110-120gr .500" 4.90mm 32" 6.90 100-110-120gr .550" 4.84mm 32" 6.50 100-110-120gr .600" 4.78mm 32" 6.10 100-110-120gr .650" 4.73mm 32" 5.83 80-90-100gr .700" 4.67mm 32" 5.55 80-90-100gr .750" 4.63mm 32" 5.31 80-90-100gr .800" 4.59mm 32" 5.06 80-90-100gr .850" 4.55mm 32" 4.94 80-90-100gr .900" 4.50mm 32" 4.81 60-70-80gr 1.000" 4.45mm 32" 4.70 60-70-80gr
WIAWIS | ACS-EL | LONG BAR
LONG ROD LENGTH | 26 inches (165g) | 28 inches (168g) |
30 inches (171g) | 32 inches (176g) |
Description
- Features graphene carbon to improve overall stiffness
- Strong end-caps increase strength in the stabilizer system
- Tapered internal design also improve dampening properties
- Weight system is 1/4" x 20
- Slim profile decreases wind drag for improved outdoor performance
- 26" 165 grams | 5.82 ounces
- 28" 168 grams | 5.93 ounces
- 30" 171 grams | 6.03 ounces
- 32" 176 grams | 6.21 ounces
- 1 Head weight 45 grams | 1.59 ounces
- 1 Flat weight 25 grams | 0.88 ounces
- 1 Bottom flat weight 45 grams | 1.59 ounces
AVALON | TEC X |ADJUSTABLE V BAR | RECURVE’S | RECURVE V BARS
Description
FIVICS SKADI-BX STABILIZER SET
- Manufactured with an advanced blow method that enhances the strength of the carbon shaft and allows for more energy to be absorbed
- Crosswind Zero design enables stable aiming even in unpredictable winds
- The end of the carbon stabilizer tapers to a 17mm diameter without adding a metal cap.
- Center diameter of 13.5mm
- Super Graphite prepreg carbon
- Weight: 175g (28”)
- DC1500s Damper and 104g Weight Stack Included
Fivics Vellator Extender
- Aluminium design
- For use with Fivics Vellator stabilisers
- Length: 3", 4"
Reviews
There are no reviews yet.