WIN&WIN | WIAWIS | HMC PLUS CARBON | RECURVE’S | SHORT STABILIZERS
₹7,000.00
Recurve archers strive for higher arrow speeds, but this results in increased vibration in the bow.
Up until now, stabilisers have not been able to effectively deal with this. Win & Win specifically designed the HMC Plus to address this issue. The system also improves dampening, absorbs shock and helps control torque during shooting.
While other stabilisers have a consistent wall thickness along their length that does not fully absorb vibration, the wall thickness of HMC Plus varies.
At the front of the rod the wall is 0.0275” (0.7mm) thick, gradually growing to 0.0787” (2mm) at the base. When installed with an extender as a full stabilisation system, HMC Plus effectively absorbs the shock produced by shooting a recurve bow.
FEATURES:
- Varying wall thickness for vibration absorption.
- Designed to be shot as a full system with extender
SPECIFICATIONS:
- Length: 10″, 11″, 12″
- Weight: 141g, 145g, 156g
- Colours: Matte Black, Black, Gold/Black, Blue, Red, White
NOTE:
SHIPPING CHARGES ARE EXTRA AS PER ACTUAL BASIS
SPECIFIC COLOR WOULD BE AVAILABLE ON SPECIAL ORDER
Prices are Negotiable for Regular customers at many Products. Be our regular Customer
Related products
CARTEL | MAXION CARBON | LONG BAR | STABILISER SET | RECURVE & COMPOUND BOW
This is a good choice for either compound or recurve archers who want a lightweight stabilizer that will kill vibration, at an affordable price. If you decide you want to increase your end weight, the threaded cap accepts add-on weights.
• Versatile, mid-range stabilizer at a great value • High modulus full carbon construction • Outside diameter: 17mm • Includes CX500 damper weight for enhanced dampening • Weight: 26" (3.6 oz.), Weight: 28" (3.7 oz.), Weight: 30" (3.9 oz.),Cartel Maxion Carbon Stabilizer:
The Maxion Carbon is a highly versatile 17mm diameter mid-range carbon stabilizer at an incredibly low price. Constructed from high modulus carbon. It features an integral CX500 damper weight for enhanced dampening properties and is available in black, blue and red colours with a fresh new design.- Lengths:
- 26in
- 28in
- 30in
- Colours:
- Black
- Blue
- Red
- Material: High modulus carbon
- Diameter: 17mm
- Threads: 5/16in base / 1/4in end
- CX500 damper weight included
AVALON | POWER | SHORT BAR | STABILIZER
SPECIFICATION:-
- Material: 46T carbon
- 14mm diameter bar for better wind resistance.
- Avalon Powr damper included.
- 2x 2oz weights included.
- Available in 10", 12", 15"
- Weight thread size: 1/4"
ACTIVE ARCHERY | STABILIZER | SHORT BAR | RECURVE BOW
- The active series stabilizer was designed to be a multi-discipline stabilizer that transcends what previously had been designed for the compound and recurve markets.
- Utilizing active proprietary .630” diameter ultra module the active series stabilizers bridge the gap between recurve archers to create a stabilizer system
- Ultra module utilizes an internally tapered carbon composite that maximizes rigidity while minimizing overall stabilizer weight. The internal addition of active signature Truss Dampening System combines with the ultra module carbon to produce a stabilizer with unrivaled dampening abilities.
RAMRODS | VEKTOR | LONG & SHORT BARS
Description
The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market.
The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56 inch to 0.5 inch taper.
Features
-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~90
-Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots in proximal endcap for tightening with a wide range of common tools.
-Made in the USA | designed and hand-built by the owners
-30″ Vektor with standard VIBRO-CORE weighs 5.6oz and with Tungsten Damping weighs 8.6oz
Sanlida X10 | Recurve Stabilizer Side Rod RC BAR | STABILIZER SET
*Full carbon materail stabilizer *Absorb vibration very well *More length and color for your option
- Length：11” 12”
- Material：Carbon
- Diameter：18mm
WNS BY WIN&WIN | SAT CARBON | RECURVE | SHORT STABILIZERS
- WNS SAT Stabilizer Short RodThe beginners stabilizer by WNS has a great value for money. This simple stabilizer is made of carbon and aluminium which absorbs most vibrations. This stabilizer comes with one weight and a damper, to adjust it to your preferences. It is available in different lengths and colours.
-
Foud Out More about this product at WNS Website Look For More Archery Products at SportzTrack Archery ShopSHORT 10, 12”
WNS | SMC CARBON | SHORT BAR | STABILIZER SET | RECURVE BOW
SMC is WNS’s revolutionary new stabilizer constructed from modern high tensile strength carbon, making it stronger and stiffer. With its highly durable 3K carbon fabric surface, the SMC stabilizing system has improved dampening qualities, shock absorbance and torque control.
Unlike other stabilizers the thickness of the SMC tube wall varies, helping it to absorb high levels of shock very quickly. The rod wall measures 0.0275” (0.7mm) at the front and 0.0787” (2mm) at the base. This creates reduces movement at the end of the rod and absorbing vibration throughout the length of the stabilizer rather than pushing it back into the bow.
NOTE:
FREIGHT CHARGES ARE EXTRA AS PER ACTUAL BASIS.
Reviews
There are no reviews yet.