Pro Series Hooded Peep Housing 37 Degree| PEEP SIGHT| SPECIALTY SIGHT|COMPOUND BOW|

DESCRIPTION

• The Pro Series Hooded peep weighs only 9.5 grains.
• Accepts all original Specialty Archery 1/8″ and smaller Apertures, Clarifiers, and Verifiers.
  • NOTE: Not compatible with Podium, PXS, or PXL Hunter Peep parts.
• Use of our Dual Aperture Wrench (#210078) is needed for insertion of Apertures, Verifiers, and Clarifiers.
• Hooded Peep helps reduce glare on Clarifier and Verifier lenses.
  • The optional screw-in Verifier lenses sharpen the pins.
  • The optional screw-in Clarifiers when used with a scope and lens sharpen the target face.
• The peep opening is 3/16″ with no Apertures, Clarifiers or Verifiers installed.
• To protect your peep from dust, debris and moisture we recommend the Peep Guard (#PG1-BLK or #PG1-RD).
• Available in 37 or 45-degree string angles.
  • See the String Angle Chart in the FAQs tab on the home page to determine which string angle is needed for your setup.
• The peep should be inserted in the string so the side with the verifier, clarifier, or aperture is on the side you look through.
• Available in Black, Blue, Camo, Green, Pink, Red, Purple and Silver.
• Standard Target Peep and component weights:
  • Ultra Lite Non-hooded Peep – 7.5 grains
  • Pro Series Hooded Peep – 9.5 grains
  • 1/8” Clarifiers/Verifiers – 4.0 grains
  • 1/8” and Smaller Apertures – 2.5 grains
  • Standard Peep Aligner (#PAS) – 13.0 grains
  • Peep weight affect on arrow velocity
• Optional Accessories:
  • #VC3 Threadmate Non-Traditional Threadlocker 5ml.
  • Apertures 1/32″, 3/64″, 1/16″, 3/32″, or 1/8″.
  • Aperture Kits:
    • #749-345 Super Ball Aperture Kit includes: Three Largest Apertures ( 1/16, 3/32, and 1/8), Wrench, and Case.
    • #749-005 Super Ball Aperture Kit includes: Five Apertures (1/32, 3/64, 1/16, 3/32, and 1/8), Wrench, and Case.
  • 1/8″ or smaller Clarifiers 0.5, 1.0, 1.5, 2.0, and 3.0.
  • 1/8″ or smaller Verifiers #4, #5, $6, #7, #8, and #9.
  • #210078 Dual Aperture Wrench.
  • #PG1-BLK Peep Guard Black or #PG1-RD Peep Guard Red.
  • #PAS Peep Aligner Adapter Standard (for standard peeps) Kit.
    • #753-6 Alignment Tubing 16″ (Silicone).
  • #PS-BLK Peep Shade.
    • #PS-BLK-R Peep Shade Replacement Tubing (4/pkg).
  • #210000 Storage Case.
  • #640 Lens Field Cleaning Kit.
  • #641 Lens Brite Anti Fog Lens Cleaner.
  • #642 Micro Fiber Lens Cloth.
  • #SA-CV Clarifier and Verifier Cleaning Vial (10ml).
  • #501 Lens Cleaning Swab (20/pkg).
  • #502 Lens Cleaning Swab (20/pkg).
• 
• 
• Additional information can be found in the FAQs tab on our home page.
• Watch the peep tying video in the Videos section of the website for proper peep installation.

CAUTION: High powered bows create a great amount of vibration. This may loosen Verifiers, Clarifiers and Apertures over time. Tighten before each use. If you hear a buzzing sound, this indicates a loose Aperture. You may use a drop of Vibra-Tite VC 3 (#VC3), Teflon tape, bow wax, or any other non-permanent binding agent on the threads.